tipp2014 January 2014

tipp2014@nikhef.nl

17 participants
185 discussions

[Tipp2014] [Indico] New abstract submission: TOMITA, Tatsuhiko
by noreply-indico-team＠cern.ch 31 Jan '14

31 Jan '14

The following email has been sent to TOMITA, Tatsuhiko: === Dear Tatsuhiko Tomita, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=117&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: TOMITA, Tatsuhiko Submitted on: 31 January 2014 02:19 Title: A study of silicon sensor for the ILD ECAL Abstract content The International Large Detector(ILD) is a proposed detector for the International Linear Collider(ILC). It has been designed to achieve an excellent Jet Energy Resolution by using Particle Flow Algorithms (PFA), which rely on the ability to separate nearby particles within jets. PFA requires calorimeters with high granularity. The ILD Electromagnetic Calorimeter(ECAL) is a sampling calorimeter with thirty tungsten absorber layers. The total thickness of this ECAL is about 20 centimeters, and it has between 10 and 100 million channels to make high granularity. Silicon sensors are a candidate technology for the sensitive layers of this ECAL. Present prototypes of these sensors have 256 5.5x5.5 mm^2 pixels in an area of 9x9cm^2. 　　　 We have measured various properties of these prototype sensors: the leakage current, capacitance, and full depletion voltage. We have also examined the response to an infrared laser to understand the sensor's response at its edge and between pixel readout pads, as well the effect of different guard ring designs. We will report on the results of these basic measurements of silicon sensor. Summary We have established a silicon sensor test bench system to measure leakage current and capacitance. The results of these measurements satisfy the requirements for the ILD ECAL. We have also studied the effects of the guard ring and inter-pixel gap by using a laser system. Primary Authors: TOMITA, Tatsuhiko (Kyushu University) <tomita(a)epp.phys.kyushu-u.ac.jp> Co-authors: KAWAGOE, Kiyotomo (Kyushu University (JP)) <kiyotomo.kawagoe(a)cern.ch> Dr. YOSHIOKA, Tamaki (ICEPP, Univ. of Tokyo) <tyosioka(a)icepp.s.u-tokyo.ac.jp> SUEHARA, Taikan (The University of Tokyo) <suehara.ch(a)kblack.icepp.s.u-tokyo.ac.jp> SUDO, Yuji (K) <sudo(a)phys.kyushu-u.ac.jp> JEANS, Daniel (U) <jeans(a)icepp.s.u-tokyo.ac.jp> KAMIYA, Yoshio (The University of Tokyo) <kamiya(a)icepp.s.u-tokyo.ac.jp> KOZAKAI, Chihiro (The University of Tokyo) <kozakai(a)icepp.s.u-tokyo.ac.jp> CHEN, Shion (The University of Tokyo) <chen(a)icepp.s.u-tokyo.ac.jp> HIRAI, Hiroto (Kyushu University) <hirai(a)epp.phys.kyushu-u.ac.jp> TAKADA, Shusuke (Kyushu University) <takada(a)epp.phys.kyushu-u.ac.jp> SUMIDA, Hiroki (Kyushu University) <sumida(a)epp.phys.kyushu-u.ac.jp> Abstract presenters: TOMITA, Tatsuhiko Track classification: Sensors: 1a) Calorimetry Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: TABATA, Makoto
by noreply-indico-team＠cern.ch 31 Jan '14

31 Jan '14

The following email has been sent to TABATA, Makoto: === Dear Makoto Tabata, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=116&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: TABATA, Makoto Submitted on: 31 January 2014 01:24 Title: Recent Progress in the Development of Large Area Silica Aerogel for Use as RICH Radiator in the Belle II Experiment Abstract content This paper presents recent progress in the development and mass production of large area hydrophobic silica aerogels for use as a radiator in the aerogel-based ring-imaging Cherenkov (A-RICH) counter that will be installed in the forward end cap of the Belle II detector under upgrade at KEK, Japan. The proximity-focusing A-RICH system is especially designed to identify charged pions and kaons by the use of aerogel Cherenkov radiators with refractive indices of 1.045 and 1.055 and to have a separation capability of greater than 4σ at momenta up to 4 GeV/c. We plan to fill the large end-cap region of 3.5 m^2 with 124 segmented dual-layer-focusing aerogel combinations (248 tiles in total). It is crucial to minimize the number of aerogel tiles (i.e., to maximize the aerogel dimensions) to reduce tile boundaries, because the number of detected photoelectrons decreases at the boundaries. Therefore, we have developed a method for producing 18 × 18 × 2 cm^3 large area, transparent aerogels with no cracking. Prepared aerogel tiles will be trimmed in fan shapes according to the cylindrical end cap with a water jet cutter, making the best use of the hydrophobic features. Mass production was started in September 2013 and is going on track. Here we report the status of optical characterization of mass-produced aerogels in addition to the results of a beam test with a prototype A-RICH counter conducted at DESY, Germany in advance of mass production. Summary Primary Authors: Dr. TABATA, Makoto (Japan Aerospace Exploration Agency (JAXA)) <makoto(a)hepburn.s.chiba-u.ac.jp> Co-authors: Prof. ADACHI, Ichiro (High Energy Accelerator Research Organization (KEK)) <ichiro.adachi(a)kek.jp> Prof. KAWAI, Hideyuki (Chiba University) <kawai(a)hepburn.s.chiba-u.ac.jp> Prof. NISHIDA, Shohei (High Energy Accelerator Research Organization (KEK)) <shohei.nishida(a)kek.jp> Prof. SUMIYOSHI, Takayuki (Tokyo Metropolitan University) <sumiyoshi(a)phys.se.tmu.ac.jp> Abstract presenters: Dr. TABATA, Makoto Track classification: Sensors: 1e) Novel technologies Presentation type: --not specified-- Comments: Presentation type request: Poster

1 0

[Tipp2014] [Indico] New abstract submission: IWATA, Shuichi
by noreply-indico-team＠cern.ch 31 Jan '14

31 Jan '14

The following email has been sent to IWATA, Shuichi: === Dear Shuichi Iwata, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=115&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: IWATA, Shuichi Submitted on: 31 January 2014 00:31 Title: Development of Hybrid Avalanche Photo Detector and its Readout Electronics for the Belle-II Aerogel RICH counter Abstract content For the Belle II experiment at the superKEKB accelerator, we have been developing a proximity focusing ring imaging Cherenkov detector using a silica aerogel as a radiator (A-RICH). This counter is designed to be used at the forward endcap region and to have pion/kaon separation with more than 4-sigma deviations at momenta up to 4 GeV/c. 144-channel Hybrid Avalanche Photo-Detector (HAPD) modules developed with Hamamatsu Photonics K.K. have been adopted as the photon detectors for the A-RICH. A total of 420 HAPD will be used in Belle II detector. We started the mass production of the HAPD. Quality of the manufactured HAPD is checked by a system that we developed. We report the status of the quality check that consists of the leakage current measurement, channel-by-channel noise level measurement, the 2-dimensional scan for photon detection, and the quantum efficiency measurement for the photo cathode. As for the readout of about 60,000 channels from the A-RICH, we developed an ASIC for the amplification and digitization of the signal from HAPDs. We started the mass production of the ASIC last year. Then we plan to test all the ASIC chips before mounting them on the front-end boards attached to HAPDs. The data from several front-end boards will be merged into one board, and are sent to the Belle II central DAQ system by an optical link called Belle2Link. For this purpose, modules called "merger board" located inside the detector are under development. Each merger board is connected to 6 front-end boards, and has an FPGA for the data merging and transmission. We are developing the firmware for the FPGA and testing it. In this presentation, status of the mass production of HAPDs and ASICs, and the development and test results for the merger board will be reported. Summary Primary Authors: Mr. IWATA, Shuichi (Tokyo Metropolitan University) <iwata(a)hepmail.phys.se.tmu.ac.jp> Co-authors: Abstract presenters: Mr. IWATA, Shuichi Track classification: Sensors: 1d) Photon Detectors Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission:
by noreply-indico-team＠cern.ch 30 Jan '14

30 Jan '14

The following email has been sent to : === Dear , The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=114&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: Submitted on: 30 January 2014 23:53 Title: Studies for a Silicon Detector in a Electron Proton/Ion Collider at BNL Abstract content More than thirty years after Quantum Chromodynamics (QCD) was first proposed as the fundamental theory of the strong force, very little is still known about the dynamical basis of the hadron structure. How do these fundamental degrees of freedom dynamically generates the mass, spin, motion and spatial distribution of color charges inside hadrons ? To investigate these fundamental question new electron proton and electron ion colliders are proposed (EIC). The inner tracking system of the detectors in these colliders will require very high granularity, low material budget and radiation hard design. In this talk will be shown some of the studies done for eRHIC: a EIC facility with polarized electron and proton beams, unpolarized ion beam, to be realized in the Brookhaven National Laboratory. This talk will focus mainly on the studies and performance simulations realized for the inner silicon tracking system and on the possibility of using Monolithic Active Pixel Silicon detector (MAPS) as silicon sensor. Summary Primary Authors: Dr. DI RUZZA, Benedetto (Brookhaven National Laboratory (USA)) <bdiruzza(a)bnl.gov> Co-authors: ASCHENAUER, Elke-caroline (BNL) <elke(a)bnl.gov> Abstract presenters: Dr. DI RUZZA, Benedetto Track classification: Sensors: 1b) Semiconductor Detectors Experiments: 2a) Experiments & Upgrades Presentation type: --not specified-- Comments: My talk can be tuned on both the two tracks.

1 0

[Tipp2014] [Indico] New abstract submission: COLLINS, Paula
by noreply-indico-team＠cern.ch 30 Jan '14

30 Jan '14

The following email has been sent to COLLINS, Paula: === Dear Paula Collins, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=113&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: COLLINS, Paula Submitted on: 30 January 2014 22:19 Title: Microchannel evaporative CO2 cooling for the LHCb VELO Upgrade Abstract content The LHCb Vertex Detector (VELO) will be upgraded in 2018 to a lightweight, pixel detector capable of 40 MHz readout and operation in very close proximity to the LHC beams. The thermal management of the system will be provided by evaporative CO2 circulating in microchannels embedded within thin silicon plates. This solution has been selected due to the excellent thermal efficiency, the absence of thermal expansion mismatch with silicon ASIC’s and sensors, the radiation hardness of CO2, and very low contribution to the material budget. Although microchannel cooling is gaining considerable attention for applications related to microelectronics, it is still a novel technology for particle physics experiments, in particular when combined with evaporative CO2 cooling. The R&D effort for LHCb is focusing on the design and layout of the channels together with a fluidic connector and its attachment to withstand pressures in excess of 200 bars. This talk will describe the design and optimization of the cooling system for LHCb together with latest prototyping results. Even distribution of the coolant is ensured by means of the use of restrictions implemented before the entrance to a race-track layout of the main cooling channels. The coolant flow and pressure drop has been simulated together with the thermal performance of the device. The results can be compared to the cooling performance of prototype plates operating in vacuum. The design of a suitable low mass connector, together with the bonding technique to the cooling plate will be described. Long term reliability as well as resistance to extremes of pressure and temperature is of prime importance. The setup and operation of a cyclic stress test of the prototype cooling channel designs will be described. Summary The status and R&D for microchannel cooling for the LHCb VELO upgrade will be described, as outlined in the abstract above. Primary Authors: COLLINS, Paula (CERN) <paula.collins(a)cern.ch> Co-authors: Abstract presenters: COLLINS, Paula Track classification: Emerging technologies: 4a) Cooling and cryogenics Presentation type: --not specified-- Comments: This abstract is submitted by Paula Collins on behalf of the LHCb VELO upgrade group and the CERN PH-DT group. If the abstract is submitted for oral presentation an excellent speaker will be selected from these groups to make the presentation.

1 0

[Tipp2014] [Indico] New abstract submission: FRISCH, Henry
by noreply-indico-team＠cern.ch 30 Jan '14

30 Jan '14

The following email has been sent to FRISCH, Henry: === Dear henry frisch, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=112&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: FRISCH, Henry Submitted on: 30 January 2014 21:41 Title: The Frugal Tile: A 20-cm-square MCP-PMT Module Comprising 8 Glass Parts Abstract content We present the design for the `Frugal Tile', an all-glass MCP-PMT with an active area of 400 square centimeters. The LAPPD glass tile module was designed to be simple, with: a) a hermetic package made of top and bottom plates and a rectangular sidewall, each made of water-jet-cut plate glass; b) an internal stack consisting of 2 glass capillary plates functionalized with Atomic Layer Deposition and 3 glass grid spacers made from waterjet-cut plate glass; and a getter assembly that drops into place. Features of the design are: no pins penetrating the envelope; c) an internal HV divider implemented by resistive coatings on the MCP's and spacers; d) RF-stripline anodes silkscreened on the bottom plate with an analog bandwidth above 1.5 GHz for good spatial and temporal resolution; e) mechanical rigidity provided by atmospheric pressure; and f) modular design for covering large areas. The tile is one component of a modular system in which an array of four tiles sits on a 1800-square-cm `Tray' section that contains the ground plane of the RF strip-lines and supports the waveform sampling and data-acquisition electronics that reads out the strips. Summary Primary Authors: FRISCH, Henry J. (Univ of Chicago) <frisch(a)hep.uchicago.edu> ELAGIN, Andrey (University of Chicago) <elagin(a)uchicago.edu> Co-authors: Abstract presenters: FRISCH, Henry J. Track classification: Sensors: 1d) Photon Detectors Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: BOGDAN, Mircea
by noreply-indico-team＠cern.ch 30 Jan '14

30 Jan '14

The following email has been sent to BOGDAN, Mircea: === Dear Mircea Bogdan, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=111&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: BOGDAN, Mircea Submitted on: 30 January 2014 21:23 Title: Design of a Deep Buffer for the 0.13um CMOS PSEC5 Waveform Sampling ASIC Abstract content We present a design for increasing the buffer length from 25.6ns to 3.3us in a 2-channel prototype of PSEC5, a custom integrated circuit designed for analog-to-digital conversion of fast analog signals at a sampling rate between 5 and 15 Gigasamples/second. The prototype is being designed in the same 0.13um IBM-8RF CMOS process as the PSEC4 ASIC [1]. The major improvements are the increase of the storage buffer from 256 cells to 32,768 cells per channel, allowing a trigger latency of ~3.3us at 10GS/sec, and an increased readout rate. The input signal is continuously sampled into a Primary Array with 256 capacitors which, for a 100ns sampling rate, is rewritten every 25.6ns. The sampling pulses are generated by a Voltage-Controlled Delay Line in 256 stages, run as a Delay-Locked Loop (DLL). The deep Storage Array is organized as two arrays, each 128 capacitors wide by 128 deep. The contents of each half of the Primary Array are transferred into the Storage Array at fixed time intervals in an alternate fashion. The writing and reading of the Storage Array is done with full external control. The design allows uninterrupted writing of the Storage Array after a trigger by selecting a region-of-interest for read-out and temporarily removing it from the recording chain. Depending on the size of the region-of-interest window, the dead time can be greatly reduced or eliminated. The sampled signals are digitized on-chip, and read out serially. The design status and simulation results will be presented. 1. NIM A735, p452; Jan. 2014 Summary Primary Authors: BOGDAN, Mircea (The University of Chicago) <bogdan(a)edg.uchicago.edu> Co-authors: Dr. BUTSYK, Sergey (The University of Hawaii at Manoa) <butsyk(a)phys.hawaii.edu> Prof. FRISCH, Henry J. (The University of Chicago) <frisch(a)hep.uchicago.edu> HEINTZ, Mary (The University of Chicago) <maryh(a)edg.uchicago.edu> OBERLA, Eric (uchicago) <ejo(a)uchicago.edu> Dr. SADWICK, Larry (Innosys, Inc) <sadwick(a)innosystech.com> VARNER, Gary (University of Hawaii) <varner(a)phys.hawaii.edu> Abstract presenters: BOGDAN, Mircea Track classification: Data-processing: 3a) Front-end Electronics Presentation type: --not specified-- Comments:

1 0

[Tipp2014] submitting an abstract
by Henry J. Frisch 30 Jan '14

30 Jan '14

Dear Tipp2014, I just tried to submit an abstract, but cannot as I do not have a CERN account, and do not use personal social media accounts for business. Many US physicists will not have CERN accounts, and almost certainly most US industrial partners and technical folks will not as well. The login presents a real barrier for non-European detector folks in submitting abstracts (this may be part of the reason you may have gotten fewer than expected, if I can guess one reason for the recent delaying of the deadline). I couldn't find an easy way to get a CERN `lightweight' account- would it be possible to get explicit instructions on how to submit an abstract from the US? I think that making the TIPP page a little more user-friendly for abstract submission would also help. Many thanks, Henry Frisch Prof. of Physics, Enrico Fermi Institute -- Henry J. Frisch HEP 320, EFI 5640 S. Ellis Ave. Chicago, Il. 60637 Phone:773-702-7479 Fax:773-834-5959

1 0

[Indico] Soumission d'un nouveau résumé: NEYRET, Damien
by noreply-indico-team＠cern.ch 30 Jan '14

30 Jan '14

The following email has been sent to NEYRET, Damien: === Dear Damien Neyret, Votre soumission de résumé a été traitée avec succès Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Statut de votre résumé: <https://indico.cern.ch/abstractDisplay.py?abstractId=110&confId=192695>. See below a detailed summary of your submitted abstract: Une conférence: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Envoyé par: NEYRET, Damien Envoyé le: 30 January 2014 19:29 Titre: Development of large size hybrid Micromegas gaseous detectors for high hadron flux at COMPASS experiment Abstract content Future physics programs using high intensity muon and hadron beams of a few hundred GeV on fixed targets are being prepared by the COMPASS experiment at CERN for the years 2015 and beyond. Large size Micromegas gaseous detectors (40x40cm² active area) which are used in COMPASS tracking since 2001 need to be upgraded in order to cope with the foreseen higher beam intensities (up to a few hundred of kHz/mm²), and in order to be active in the beam area where the present detectors are blind. Sparks generation between electrodes by highly ionizing particles is a major issue for Micromegas detectors at high hadron flux; several studies are lead to cope with it, most of them focused on resistive layers deposited above the read-out anodes. Beside studies done on specific resistive Micromegas detectors using buried resistor technology, our group did a lot of efforts to study, in view to reduce spark rate, hybrid detectors, which are a combination of a non-resistive Micromegas board and a pre-amplifying GEM foil. Performance of both hybrid and resistive detectors where measured in test beams and in the COMPASS environment with both muon and hadron beams. Hybrid detectors showed very promising results in term of spark rate reduction as well as spatial and time resolutions, and efficiencies. Two hybrid detectors were finally installed as active trackers at COMPASS for the 2012 run, becoming the first Micromegas detectors featuring a spark reduction technology used in an actual high flux particle physics experiment. The preparation of the detector production is presently in progress, and all the Micromegas detectors will be replaced by hybrid ones for the next COMPASS run in spring 2015. After a presentation of the project and its constraints, an overview of the performance of both resistive and hybrid detectors will be given, with an emphasis on the interest of hybrid Micromegas. The comparison between both types of detectors will be discussed, based on detector performance as well as on the capacity for the industry to build such detectors and on their cost. The impact on the tracking efficiency of the detector reconstruction optimization will also be discussed with the particular case of the highly occupied beam area, and the possibilities to optimize the detector design for the final production will be presented. Summary Auteurs principaux: NEYRET, Damien (CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR)) <damien.neyret(a)cern.ch> Co-auteurs: Abstract presenters: NEYRET, Damien Classification des thématiques: Sensors: 1c) Gaseous Detectors Type de présentation: --non spécifié-- Commentaires:

1 0

[Tipp2014] [Indico] New abstract submission: BASTOS DE OLIVEIRA, Carlos Alberto
by noreply-indico-team＠cern.ch 30 Jan '14

30 Jan '14

The following email has been sent to BASTOS DE OLIVEIRA, Carlos Alberto: === Dear Carlos Alberto Bastos De Oliveira, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=109&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: BASTOS DE OLIVEIRA, Carlos Alberto Submitted on: 30 January 2014 18:22 Title: First experimental results in High Pressure Xe+TMA mixtures towards supra-intrinsic performance in Dark Matter and 0νββ decay searches Abstract content High Pressure Gaseous Xenon shows outstanding intrinsic energy resolutions when compared with the liquid phase due to the smaller (~20x) Fano factor. The gaseous phase should also show better electron to nuclear recoil discrimination based on the ratio of ionization to scintillation signals (S2/S1). The addition of trimethylamine (TMA) may further improve the energy resolution due to the Penning effect with atoms of xenon. Good energy resolution is of particular importance for 0νββ decay searches. Molecular interactions may shift the 172 nm light from pure xenon to the 280 – 320 nm range, in which TMA fluoresces, matching the excitation peak of wavelength-shifting commercial plastic. High light collection efficiency and better SNR of S1 and S2 may thus be possible, leading to even better electron to nuclear recoil discrimination. In addition, TMA may also be the key for sensing directionality of nuclear recoils induced by Weakly Interacting Massive Particles (WIMPs) without the need of track imaging in monolithic massive (ton-scale) detectors, by making use of columnar recombination. Nuclear recoil directionality may be the path for a definite discovery of the WIMP nature of Dark Matter. An ionization chamber has been constructed to explore the properties of high pressure gaseous Xe + TMA mixtures. Charge and light signals (primary scintillation and electroluminescence) are measured as functions of pressure, electric field and additive concentration. We present preliminary results for pressures up to 8 bar and additive concentrations up to 1%. This work has been carried out within the context of the NEXT collaboration. Summary Primary Authors: OLIVEIRA, Carlos (Lawrence Berkeley National Laboratory) <cabdoliveira(a)lbl.gov> Co-authors: Dr. GEHMAN, Victor (LBNL) <vmgehman(a)lbl.gov> Dr. GOLDSCHMIDT, Azriel (Lawrence Berkeley National Laboratory) <agoldschmidt(a)lbl.gov> Dr. GOMEZ-CADENAS, Juan Jose (Institut de Física Corpuscular) <gomez(a)mail.cern.ch> Dr. NYGREN, David (Lawrence Berkeley National Laboratory) <drnygren(a)lbl.gov> Mr. RENNER, Joshua (Lawrence Berkeley National Laboratory) <jrenner(a)lbl.gov> Dr. VELOSO, João (University of Aveiro) <joao.veloso(a)ua.pt> Abstract presenters: OLIVEIRA, Carlos Track classification: Sensors: 1c) Gaseous Detectors Presentation type: --not specified-- Comments:

1 0

← Newer
1
...
4
5
6
7
8
9
10
...
19
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

tipp2014 January 2014