- tipp2014@nikhef.nl - Nikhef Listerserver

[Tipp2014] [Indico] New abstract submission: SHRESTHA, Shruti
by noreply-indico-team＠cern.ch 23 Jan '14

23 Jan '14

The following email has been sent to SHRESTHA, Shruti: === Dear Shruti Shrestha, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=30&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: SHRESTHA, Shruti Submitted on: 23 January 2014 18:59 Title: The High-Voltage Monolithic Active Pixel Sensor for the Mu3e Experiment Abstract content The Mu3e experiment searches for the lepton flavor violating decay $\mu^{+}\rightarrow e^{+}e^{-}e^{+}$. We are aiming for a sensitivity of one in $10^{16}$ $\mu$-decays. To measure the momentum and vertex position of low momentum electrons (10 - 53 MeV/c) originating from such a rare decay with high precision, a tracking detector built from High-Voltage Monolithic Active Pixel Sensors (HV-MAPS) is implemented. The MUPIX chips are HV-MAPS designed for Mu3e and are implemented in 180 nm HV-CMOS technology. HV-MAPS is the technology of choice because it can be thinned to 50~$\mu$m, is radiation-tolerant, has a high time resolution, and is low cost. Furthermore, the pixel electronics are embedded inside the sensor chip to reduce the material budget. Performance results of the MUPIX4 chip are presented. In 2013, we tested the MUPIX4 chip using a 1 - 6~GeV electron beam at DESY. The discussed results include the spatial resolution, time resolution, and efficiency of the MUPIX4 chip. Summary Primary Authors: Dr. SHRESTHA, Shruti (Physikalisches Institut Heidelberg) <shruti(a)physi.uni-heidelberg.de> Co-authors: Abstract presenters: Dr. SHRESTHA, Shruti Track classification: Sensors: 1b) Semiconductor Detectors Presentation type: --not specified-- Comments: I would like to give the talk "The High-Voltage Monolithic Active Pixel Sensor for the Mu3e Experiment" on behalf of Mu3e Collaboration.

1 0

[Tipp2014] abstract submission on behalf of CMS collaboration
by Adi Bornheim 23 Jan '14

23 Jan '14

Dear TIPP organisers, I am in charge of coordinating conference submission on behalf of the CMS ECAL collaboration. I was wondering if it is mandatory to specify the speakers name at submission time or can we submit on behalf of the collaboration in case we have not decided on the individual presenting ? Kind regards, Adi Bornheim

1 0

[Tipp2014] [Indico] New abstract submission: GARUTTI, Erika
by noreply-indico-team＠cern.ch 23 Jan '14

23 Jan '14

The following email has been sent to GARUTTI, Erika: === Dear Erika Garutti, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=29&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: GARUTTI, Erika Submitted on: 23 January 2014 08:59 Title: : EndoTOFPET-US: a novel multimodal tool for endoscopy and positron emission tomography Abstract content The EndoTOFPET-US project aims to jointly exploit Time-Of-Flight Positron Emission Tomography (TOFPET) and ultrasound endoscopy with a multi-modal instrument for diagnostic and therapeutic oncology. The development of two novel detectors is required, a PET head extension for a commercial US endoscope placed close to the region of interest (ROI) and a PET plate over the patient’s abdomen in coincidence with the PET head. Technological challenges include: 1 mm image spatial resolution (SR), an unprecedented 200ps Coincidence Time Resolution (CTR) for enhanced background rejection, online tracking of both detectors and image reconstruction of images with partial volume information from an asymmetric geometry. The paper will present results achieved with the first prototype components of the EndoTOFPET-US detector. Characterization of 4096 LYSO crystals glued to 256 Hammamatsu MPPC matrices of 4x4 photo-detectors each, performance tests of two candidate ASIC chips for fast TOF readout, and performance studies of the digital silicon-photomultiplier detector for the endoscopic probe will be presented. The first system integration measurements will be shown, which demonstrate that the requirements in terms of SR and CTR are at reach. Summary Primary Authors: GARUTTI, Erika (DESY) <erika.garutti(a)desy.de> Co-authors: Abstract presenters: GARUTTI, Erika Track classification: Technology transfer: 5b) Health and healthcare Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: ALGHAMDI, Abdulrahman
by noreply-indico-team＠cern.ch 23 Jan '14

23 Jan '14

The following email has been sent to ALGHAMDI, Abdulrahman: === Dear Abdulrahman Alghamdi, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=28&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: ALGHAMDI, Abdulrahman Submitted on: 23 January 2014 07:47 Title: Design and operation of a Small Gas Electron Multiplier detectors at KACST Detector Lab: Constructions and Preliminarily Results Abstract content The Gas Electron Multiplier detectors technology is well known for its high counting rate, charge and position resolution capabilities. Under the umbrella of the KACST Detector Laboratory (KDL) project we have succeeded in designing, constructing and, operating a single channel small (10x10 cm2 ) GEM detector for radiation detection applications. The performances of the detector was tested using two mixture of gases; Ar-CO2 (80:20) mixture and He-CO2 (80:20) using five γ-rays sources with energy range from 64.5 to 662 keV. In addition, one α-particle source with energy of 5.48 MeV was used. In this paper the technical aspects of this detector will be briefly discussed. The experimental procedures and the obtained results will be given. Future work and further improvements to the performances of the detector in several applications will be outlined. Summary Primary Authors: Dr. MAGHRABI, Abdullrahman H. (NCMP-KACST-Saudi Arabia) <amaghrabi(a)kacst.edu.sa> Co-authors: ALGHAMDI, Abdulrahman (KACST) <aghamdi(a)kacst.edu.sa> Mr. AL-MUTAYRI, Mohmmed M. (NCMP-KACST-Saudi Arabia) <malmutayri(a)kacst.edu.sa> Mr. ALANAZI, Mohammad S. (NCMP-KACST- Saudi Arabia) <malanazi(a)kacst.edu.sa> Mr. ALDOSARY, Abdullah (NCMP-KACST-Saudi Arabia) <aaldosary(a)kacst.edu.sa> Abstract presenters: Dr. MAGHRABI, Abdullrahman H. ALGHAMDI, Abdulrahman Mr. ALANAZI, Mohammad S. Track classification: Sensors: 1c) Gaseous Detectors Technology transfer: 5b) Health and healthcare Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: ALGHAMDI, Abdulrahman
by noreply-indico-team＠cern.ch 23 Jan '14

23 Jan '14

The following email has been sent to ALGHAMDI, Abdulrahman: === Dear Abdulrahman Alghamdi, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=27&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: ALGHAMDI, Abdulrahman Submitted on: 23 January 2014 07:09 Title: Designing and Construction a Prototype GEM Detector for 2D Proton Dosimetry Applications Abstract content The main objective of this project is to develop a medical imaging system to be used in the two dimensions Proton dosimetry applications using the gas electron multiplier technology. These include designing and construction of the detector, readout board, and related electronics. The first step toward attaining the goal of this project is to build a prototype of triple-GEM detector (10cm x10cm) that can achieve the goals of the project. This paper presents the designing, construction and testing of the prototype detector includes the discussions of outlined tasks and achievements as well as the preliminary results from X-ray and some gamma sources. The future plan of the whole project and more details about the next stages will be presented in this paper as well. Summary Primary Authors: Dr. ALGHAMDI, Abdulrahman S. (National Center for Mathematics and Physics, KACST) <aghamdi(a)kacst.edu.sa> Co-authors: Dr. MAGHRABI, Abdullrahman H. (NCMP - KACST - Saudi Arabia) <amaghrabi(a)kacst.edu.sa> Abstract presenters: Dr. ALGHAMDI, Abdulrahman S. Dr. MAGHRABI, Abdullrahman H. Track classification: Technology transfer: 5b) Health and healthcare Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: YOO, Jonghee
by noreply-indico-team＠cern.ch 23 Jan '14

23 Jan '14

The following email has been sent to YOO, Jonghee: === Dear Jonghee Yoo, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=26&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: YOO, Jonghee Submitted on: 23 January 2014 04:36 Title: R&D for Solid Xenon Particle Detector Abstract content The solid (crystallin) phase of xenon possesses many of the same advantages of liquid xenon as a particle detector material including good transparency, self-shielding, low intrinsic background, and high scintillation light yield. Many of the properties of solid xenon have been measured previously employing small volumes and thin films. Two major R\&D issues must be addressed to make a solid xenon particle detector; the demonstration of the scalability of solid xenon and the capability to readout scintillation lights and ionization signals from the solid xenon. Both issues are being addressed with a dedicated cryogenic system at Fermilab. In this talk, we will report the recent results of the solid xenon detector R&D. Summary Primary Authors: YOO, Jonghee (Fermilab) <yoo(a)fnal.gov> Co-authors: Abstract presenters: YOO, Jonghee Track classification: Emerging technologies: 4a) Cooling and cryogenics Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: Mr. ZHOU, Yi
by noreply-indico-team＠cern.ch 23 Jan '14

23 Jan '14

The following email has been sent to Mr. ZHOU, Yi: === Dear Yi Zhou, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=25&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: Mr. ZHOU, Yi Submitted on: 23 January 2014 03:18 Title: The R&D of the GEM Detector Based on NS2 Technology Abstract content NS2 technology is a newly developed self-stretch technology for the construction of the large area gas electron multiplier (GEM) detector. Using the NS2 technology, we have built a 30cm×30cm GEM detector. This R&D work includes the mechanical design for detector frames and test setup. The detector is assembled and tested in the state key laboratory of particle detection and electronics at USTC, all the test results will be presented. Summary Primary Authors: Mr. ZHOU, Yi (University of Science&Technology of China) <zhouyi(a)mail.ustc.edu.cn> LI, Cheng () <licheng(a)ustc.edu.cn> Mr. YOU, Wenhao (University of Science and Technology of China) <wenhao80(a)mail.ustc.edu.cn> Co-authors: Abstract presenters: Mr. ZHOU, Yi LI, Cheng Mr. YOU, Wenhao Track classification: Sensors: 1c) Gaseous Detectors Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission:
by noreply-indico-team＠cern.ch 22 Jan '14

22 Jan '14

The following email has been sent to : === Dear , The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=24&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: Submitted on: 22 January 2014 15:42 Title: A Zero Ion Backflow electron multiplier operating in noble gases Abstract content We present a new concept for the suppression of the secondary ions in gaseous detectors. The Zero Ion Backflow electron multiplier operates in a noble gas atmosphere and supress the ion backflow to the level of the primary ionization, totally blocking the secondary ions that are produced in the multiplier. This detector is composed by a proportional scintillation region, composed by two highly transparent meshes, followed by a gaseous photon-multiplier. The primary electrons drift through the proportional scintillation region under the influence of an electric field below the ionization threshold of the gas, emitting electroluminescence without the production of secondary ions. The electroluminescence signals are collected by the gaseous photon multiplier, composed by a gaseous electron multiplier coupled to a CsI phothocade, and further amplified by electron avalanche. The positive ions that result from electron avalanches in the gaseous photomultiplier are prevented from reaching the conversion region by an electrostatic separation between the proportional scintillation region and the gaseous photomultiplier. The ion back flow is therefore reduced to the level of the primary ionization and is totally independent on the electron avalanches that occur on the gaseous photomultiplier. Summary We present the results obtained with the Zero Ion Backflow electron multiplier operated in pure Xenon equipped with a proportional scintillation region of 6 mm. The gaseous photomultiplier is composed by a double GEM cascade coupled to a CsI photocathode, separated from the proportional scintillation region by an extraction region with 2 mm. The transference of the secondary ions from the gaseous photomultiplier to the proportional scintillation region is dependent on the electric field between these two regions, EExtraction, that also influences the photoelectron extraction from the CsI photocathode. We have determined the influence of this field on the levels of ion backflow and on the photo-electron extraction. A value between 0.1 and 0.2 kV/cm*bar was found to ensure simultaneously maximum relative photoelectron extraction and full ion backflow suppression. Energy resolution of 17% was measured when irradiating the detector with 5.9 keV x-rays. Primary Authors: Mr. AMARO, Fernando (Coimbra University) <famaro(a)gian.fis.uc.pt> Co-authors: DOS SANTOS, Joaquim (University of Coimbra) <jmf(a)gian.fis.uc.pt> VELOSO, Joao (university of aveiro) <joao.veloso(a)ua.pt> Mr. BALL, Markus (Technical University Munich) <valderama73(a)gmail.com> Abstract presenters: Mr. AMARO, Fernando Track classification: Sensors: 1c) Gaseous Detectors Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: SAKO, Hiroyuki
by noreply-indico-team＠cern.ch 22 Jan '14

22 Jan '14

The following email has been sent to SAKO, Hiroyuki: === Dear Hiroyuki Sako, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=23&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: SAKO, Hiroyuki Submitted on: 22 January 2014 10:58 Title: Scintillating Fiber Detector for the Beam Loss Proton Measurements at J-PARC Linac Abstract content In the J-PARC linac, due to its high intensity H- beam, significant beam loss has been observed at the downstream straight beam line section called ACS (Annular-Coupled Structure linac). The loss is mainly due to a proton which is produced due to double electron stripping of the H^- beam by the residual gas inside the beam pipe, and the titanium beam pipe. We have developed a detector system consisting of 8 planes of scintillating fiber hodoscopes in order to measure proton tracks emitted from the beam pipe of the J-PARC linac. The system measures positions of the charged particle tracks in a small solid angle, and also measures the time-of-flight of each particle. We show angular and energy distribututions of the proton tracks measured in 2012-2013. We also show comparison of the results with simulation. Summary Primary Authors: SAKO, Hiroyuki (Japan Atomic Research Agency) <hiroyuki.sako(a)j-parc.jp> Co-authors: Dr. MARUTA, Tomofumi (KEK) <tmaruta(a)post.j-parc.jp> Mr. MIURA, Akihiko (Japan Atomic Energy Agency) <miura.akihiko(a)jaea.go.jp> Dr. KONSTANTINOVA, Olga (KEK) <olga(a)post.kek.jp> Abstract presenters: SAKO, Hiroyuki Track classification: Experiments: 2a) Experiments & Upgrades Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: SAKO, Hiroyuki
by noreply-indico-team＠cern.ch 22 Jan '14

22 Jan '14

The following email has been sent to SAKO, Hiroyuki: === Dear Hiroyuki Sako, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=22&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: SAKO, Hiroyuki Submitted on: 22 January 2014 10:43 Title: Development of a GEM-based TPC for H-dibaryon Search at J-PARC Abstract content We have developed a TPC using GEMs and a gating grid to search for the H-dibaryon at J-PARC with high rate hadron beams up to 10^6 Hz /cm^2. The TPC consists of an octagonal-shape drift cage of 50 cm diameter and 55 cm height, filled with Ar-CH_4 (90:10) gas, and the end cap chamber consisting of a gating grid plane, 3-layer GEMs, and a pad plane. The TPC is operated in a dipole magnetic field of 1 T in parallel to the drift electric field. The horizontal position resolution is expected better than 300 um. We have build a small-scale prototype TPC and performed a beam test. The position shift due to positive-ion feedback was suppressed within ±0.2 mm both in transverse and longitudinal directions at the beam rate up to 5 × 105 cps/cm2. Detection efficiency of 97 % per pad row at a low rate (103 cps/cm2) beam, and 90 % at a high rate (106 cps/cm2) beam were achieved. We also performed a laser test of the prototype in magnetic field. We observed a reasonable improvement of the position resolution due to the magnetic field. We also show the status of the test of the end cap chamber of the full-size TPC. Summary Primary Authors: SAKO, Hiroyuki (Japan Atomic Research Agency) <hiroyuki.sako(a)j-parc.jp> Co-authors: Prof. IMAI, Kenichi (Japan Atomic Energy Agency) <kimai(a)post.j-parc.jp> SATO, Susumu (jaea) <susumu.sato(a)j-parc.jp> HASEGAWA, Shoichi (J) <hasegawa.shoichi(a)jaea.go.jp> Abstract presenters: SAKO, Hiroyuki Track classification: Sensors: 1c) Gaseous Detectors Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: WHITE, Andrew
by noreply-indico-team＠cern.ch 22 Jan '14

22 Jan '14

The following email has been sent to WHITE, Andrew: === Dear Andrew White, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=21&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: WHITE, Andrew Submitted on: 22 January 2014 02:11 Title: Micro Pattern Gas Detector Technologies and Applications - the work of the RD51 Collaboration Abstract content Driven by the availability of modern photolithographic techniques, the Micro Pattern Gas Detectors (MPGD) have been introduced in the last years of the 20th century by pioneer activities: Gas Electron Multipliers (GEM) and Micromegas, later followed by thick-GEM, resistive GEM (RETGEM) and novel micro-pattern devices. Nowadays, a flourishing of R&D activities dedicated to MPGDs and of diversified applications is ongoing, largely favored by the technological collaboration RD51, whose aims are to facilitate the development of these advanced gas-avalanche detector technologies and associated electronic-readout systems, for applications in basic and applied research. The areas of activities within RD51 include MPGD technology and new structures, device characterization, software and simulations, electronics, MPGD production, common test facilities, and applications of MPGD. By this coverage of all aspects of MPGD, RD51 aims to bring together leading experts in the field for the development of new technology and colleagues using this technology for a wide array of applications. This talk will review the activities of the RD51 by summarising the first five years of the Collaboration activity and by anticipating the future programmes, planned over the next five years. Summary This talk will cover the work of the CERN-based RD51 Collaboration developing Micro Pattern Gas Detectors for a wide range of applications. Primary Authors: Dr. DALLA TORRE, Silvia (INFN Trieste) <silvia.dallatorre(a)ts.infn.it> Co-authors: Abstract presenters: Dr. DALLA TORRE, Silvia Track classification: Sensors: 1c) Gaseous Detectors Presentation type: --not specified-- Comments: Dr. Silvia Dalla Torre (INFN Trieste) will present this talk on behalf of the RD51 Collaboration.

1 0

[Tipp2014] [Indico] New abstract submission: Prof. TAKESHITA, Toru
by noreply-indico-team＠cern.ch 22 Jan '14

22 Jan '14

The following email has been sent to Prof. TAKESHITA, Toru: === Dear Toru Takeshita, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=20&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: Prof. TAKESHITA, Toru Submitted on: 22 January 2014 01:54 Title: Verification of the compton-PET and a new approach to SPECT Abstract content An idea of Compton-PET is not new, however, current trend to be equipped heavy and smaller scintillators makes this idea feasible and easy. Two layers which composed of 3x3 scintillator matrix read out by 9 MPPC are fabricated and tested. The results of the experiment and comparison to the simulation will be presented. Furthermore, much smaller scintillator makes to improve the SPECT resolution with small PPD which is available in the market. A new SPECT idea with such smaller scintillator and MPPC is also fabricated and tested. The results and comparison to the simulation are presented and discussed. Summary The compton-PET will reduce the patience dose or the testing time to be 1/3. A new SPECT will increase the special resolution to be comparable 1mm. Primary Authors: KOTERA, Katsushige (Shinshu University) <coterra(a)azusa.shinshu-u.ac.jp> HASEGAWA, Yoji (Shinshu University (JP)) <yoji.hasegawa(a)cern.ch> , T. Takeshita (Shinshu Univ.) <tohru(a)shinshu-u.ac.jp> Co-authors: Mr. SAKO, Kunihiro (Shinshu Univ.) <sako(a)azusa.shinshu-u.ac.jp> Mr. MIYASHITA, Yuki (Shinshu Univ.) <miyashita(a)azusa.shinshu-u.ac.jp> Mr. OGURA, Takayoshi (Shinshu Univ.) <ogura(a)azusa.shinshu-u.ac.jp> Mr. TSUCHIMOTO, Koya (Shinshu Univ.) <tsuchimoto(a)azusa.shinshu-u.ac.jp> Abstract presenters: , T. Takeshita Track classification: Technology transfer: 5b) Health and healthcare Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: Dr. LIPTON, Ronald
by noreply-indico-team＠cern.ch 21 Jan '14

21 Jan '14

The following email has been sent to Dr. LIPTON, Ronald: === Dear Ronald Lipton, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=19&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: Dr. LIPTON, Ronald Submitted on: 21 January 2014 21:26 Title: Three Dimensional Integrated Circuits for Large Area Arrays Abstract content Three dimensional integrated circuit technologies offer the possibility of fabricating large area arrays of sensors integrated with complex electronics with minimal dead area. We describe the current status of two demonstration projects. The first is to integrate 3D electronics with active edge sensors to produce "active tiles" which can be tested and assembled in to arrays of arbitrary size with high yield. This includes studies of possible post-processing to achieve active edges without the complexity of silicon-on-insulator sensor assemblies. The second is to explore the use of silicon or glass interposers (2.5 D) to assemble arrays that integrate and match the pitch of large area sensors with arrays of readout integrated circuits. Summary Primary Authors: Dr. LIPTON, Ronald (Fermi National Accelerator Lab. (US)) <ronald.lipton(a)cern.ch> Dr. DEPTUCH, Grzegorz (Fermi National Accelerator Lab. (US)) <grzegorz.wladyslaw.deptuch(a)cern.ch> Co-authors: Abstract presenters: Dr. DEPTUCH, Grzegorz Track classification: Emerging technologies: 4c) 3D integration Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: BOMBEN, Marco
by noreply-indico-team＠cern.ch 21 Jan '14

21 Jan '14

The following email has been sent to BOMBEN, Marco: === Dear Marco Bomben, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=18&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: BOMBEN, Marco Submitted on: 21 January 2014 14:27 Title: Performance Of Thin Edgeless N-on-p Planar Pixel Sensors For ATLAS Upgrades Abstract content In view of the LHC upgrade phases towards the High Luminosity LHC (HL-LHC), the ATLAS experiment plans to upgrade the Inner Detector with an all-silicon system. Because of its radiation hardness and cost effectiveness, the n-on-p silicon technology is a promising candidate for a large area pixel detector. The paper reports on the joint development, by LPNHE and FBK, of novel n-on-p edgeless planar pixel sensors, making use of the active trench concept for the reduction of the dead area at the periphery of the device. After discussing the sensor technology, a complete overview of the electrical characterization of the produced devices will be given, together with results on the charge collection efficiency. Measurements on irradiated devices will be presented too. The results will be compared to device simulations we run and to other current edgeless planar productions aimed at the ATLAS tracker upgrade for the HL-LHC. Eventually results from beam test measurements with minimum ionizing particles, such as hit and charge collection efficiency - in particular at the sensor periphery, for these edgeless sensors will be discussed. Summary Primary Authors: BOMBEN, Marco (Centre National de la Recherche Scientifique (FR)) <marco.bomben(a)cern.ch> Co-authors: CALDERINI, Giovanni (Centre National de la Recherche Scientifique (FR)) <giovanni.calderini(a)lpnhe.in2p3.fr> MARCHIORI, Giovanni (LPNHE Paris) <giovanni.marchiori(a)cern.ch> CHAUVEAU, Jacques (Centre National de la Recherche Scientifique (FR)) <chauveau(a)in2p3.fr> LA ROSA, Alessandro (Universite de Geneve (CH)) <alessandro.larosa(a)cern.ch> GIACOMINI, Gabriele (Fondazione Bruno Kessler) <ggiacomini(a)fbk.eu> BOSCARDIN, Maurizio (FBK Trento) <boscardi(a)fbk.eu> ZORZI, Nicola (Fondazione Bruno Kessler - FBK) <zorzi(a)fbk.eu> BOSISIO, Luciano (Universita e INFN (IT)) <bosisio(a)ts.infn.it> BAGOLINI, Alvise (Fondazione Bruno Kessler, Centro per i Materiali e i Microsistemi (FBK-CMM) Povo di Trento (TN), Italy) <bagolini(a)fbk.eu> Abstract presenters: BOMBEN, Marco Track classification: Sensors: 1b) Semiconductor Detectors Experiments: 2a) Experiments & Upgrades Presentation type: --not specified-- Comments:

1 0

[Tipp2014] TIPP2014 / iseg
by Maik Donix 21 Jan '14

21 Jan '14

Dear Sir or Madam, we iseg Spezialelektronik GmbH (developer and manufacturer of precise high voltage power supplies) would like to exhibit at TIPP2014 conference. Pls. let me know how to proceed. BTW: we would like to share a booth with affiliated company (W-IE-NE-R), I hope that would be possible. Pls. let me know your comments Best regards Maik Donix -- Maik Donix, Dipl.-Wi.-Ing. sales / Vertrieb | mobil:++49 172 6569 267 iseg Spezialelektronik GmbH | fon: ++49 351 269 9625 Bautzner Landstr. 23 | mail: maik.donix(a)iseg-hv.de D-01454 Radeberg OT Rossendorf | web: www.iseg-hv.de Geschäftsführer/Managing Director: Dr. Frank Gleisberg, Dr. Joachim Pöthig Registergericht/Lower District Court: Amtsgericht Dresden HRB 16250 Umsatzsteuer-Identnummer / VAT Id: DE 812 50 89 42 Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. This e-mail may contains confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.

1 0

[Tipp2014] urgent enquiry
by Kajari Mazumdar 20 Jan '14

20 Jan '14

Dear Organizers of TIPP2014, This is on behalf of the conference committee for CMS collaboration, LHC. I am the coordinator of this conference and I would like to know if you will accept abstracts on behalf of the experiment or you prefer individuals submitting their own abstracts. Thank you for clarification. With kind regards -- Kajari Mazumdar

1 0

[Tipp2014] [Indico] New abstract submission: DYCHKANT, Alexandre
by noreply-indico-team＠cern.ch 19 Jan '14

19 Jan '14

The following email has been sent to DYCHKANT, Alexandre: === Dear Alexandre Dychkant, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=17&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: DYCHKANT, Alexandre Submitted on: 19 January 2014 21:37 Title: An Array of Spherically Dimpled Scintillating Cells for an Integrated Readout Layer Abstract content The CALICE collaboration has been developing calorimetry for particle flow algorithms based detectors. To measure particle shower development, a finely segmented calorimeter optimized for PFA must consist of millions of channels. A scintillator-based calorimeter with cells of size 30 x 30 x 3 mm3 and read out with silicon photo-multipliers (SiPMs) shows great promise. The construction and assembly challenges of a highly segmented, scintillator-SiPM calorimeter could be greatly reduced with full integration of the read out electronics into active calorimeter layers. An integrated readout layer (IRL) comprised of a multi-channel electronics board instrumented with SiPMs paired to an monolithic array of scintillator cells, would eliminate much of the labor intensive production associated with individual readout cells. In this presentation we discuss the development and performance of injection molded polystyrene arrays of 2x2 dimpled scintillator cells with a thickness of 3mm and individual cell area of about 900 mm2. (The dimpled or concave shaped cells ensure uniformity of response for a SiPM positioned at the center of the cell.) The performances of arrays of molded cells are compared to arrays of cells machined from sheets of polyvinyltolulene scintillator of same thickness. To improve performance of molded array the depth of dimple of single injection molded cell needs to be optimized. The light output, uniformity, and cross talk of the molded and machined cells irradiated with a Sr-90 source and measured with a SiPM in current mode are reported. Plans for initial particle beam tests of the complete IRL will be also discussed. Summary Primary Authors: Dr. DYSHKANT, Alexandre (Northern Illinois University) <dyshkant(a)nicadd.niu.edu> Dr. ZUTSHI, Vishnu (Northern Illinois University) <zutshi(a)nicadd.niu.edu> Prof. BLAZEY, Gerald (Northern Illinois University) <gblazey(a)nicadd.niu.edu> Co-authors: Prof. HEDIN, David (Northern Illinois University) <hedin(a)nicadd.niu.edu> Dr. FRANKIS, Kurt (Northern Illinois University) <kfrankis(a)nicadd.niu.edu> Abstract presenters: Dr. DYSHKANT, Alexandre Track classification: Sensors: 1a) Calorimetry Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: BONESINI, Maurizio
by noreply-indico-team＠cern.ch 17 Jan '14

17 Jan '14

The following email has been sent to BONESINI, Maurizio: === Dear Maurizio Bonesini, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=16&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: BONESINI, Maurizio Submitted on: 17 January 2014 15:03 Title: Performances of SiPMT array readout for fast time-of-flight detectors Abstract content Array of SiPMTs may be used, in place of fast conventional photomultipliers (PMTs), for the readout of scintillator based time-of-flight systems. These new detectors are insensitive to external magnetic fields, have lower cost than traditional PMTs and present a compact design. Comparison of the obtained timing resolutions as respect to the baseline one (~ 50 ps) obtained with Hamamatsu R4998 PMTs are reported. Results using arrays from Hamamatsu, SenSL, Advansid will be shown. Tests were done in laboratory both with cosmics and an home developed laser system, based on a fast Avtech pulse and a Nichia laser-diode, capable of simulating the signal from a MIP. Summary Primary Authors: Dr. BONESINI, Maurizio (Universita & INFN, Milano-Bicocca (IT)) <maurizio.bonesini(a)cmib.infn.it> Co-authors: BERTONI, Roberto (Univ. + INFN) <bertoni(a)mib.infn.it> DE BARI, Antonio (Universita' di Pavia) <antonio.debari(a)unipv.it> ROSSELLA, Massimo (Sezione INFN Pavia) <massimo.rossella(a)pv.infn.it> NARDO', Roberto (Sezione INFN e Universita' Pavia) <nardo(a)unipv.it> PRATA, Marco (Sezione INFN Pavia) <marco.prata(a)pv.infn.it> Abstract presenters: Dr. BONESINI, Maurizio Track classification: Sensors: 1d) Photon Detectors Sensors: 1e) Novel technologies Experiments: 2a) Experiments & Upgrades Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: BONESINI, Maurizio
by noreply-indico-team＠cern.ch 17 Jan '14

17 Jan '14

The following email has been sent to BONESINI, Maurizio: === Dear Maurizio Bonesini, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=15&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: BONESINI, Maurizio Submitted on: 17 January 2014 14:57 Title: Development of a Fast Diode-Laser based Calibration System for Time-of-Flight Systems Abstract content Scintillator based time-of-flight system may reach good intrinsic time resolution, by using fast scintillators and photomultipliers. Examples are the large time-of-flight system constructed for the HARP experiment at CERN PS (~150 ps detector resolution) or the most demanding time-of-flight system of the MICE experiment at RAL (~50-60 ps detector resolution). This level of intrinsic timing resolutions puts demanding requirements on the laser based calibration system for day by day time monitoring. Such as system may be realized by splitting a fast laser beam (FWHM~ 30 ps) to a fast photodiode, giving the START for the TDC system, and injecting the laser light into a system of fibers that transmit the pulse to the individual counters to be calibrated, giving the STOP signal. Due to the limited power of diode-laser systems (up to 1 W) extreme care must be put to minimize power losses. The choice of the type of optical fiber to be used (multimode vs single-mode)is another critical issue. Step-index multimode fibers has been chosen giving the best trade-off between input power loss minimization and timing properties of the system. A system based on optical switches, fused fiber splitters and a fast diode-laser will be described, together with the laboratory tests needed to optimize the choice of components and characterize completely the timing performances. Summary Primary Authors: Dr. BONESINI, Maurizio (Sezione INFN Milano Bicocca) <maurizio.bonesini(a)mib.infn.it> Co-authors: BERTONI, Roberto (Sezione INFN Milano Bicocca) <bertoni(a)mib.infn.it> DE BARI, Antonio (Sezione INFN e Universita' di Pavia) <antonio.debari(a)unipv.it> ROSSELLA, Massimo (Sezione INFN Pavia) <massimo.rossella(a)pv.infn.it> Abstract presenters: Dr. BONESINI, Maurizio Track classification: Experiments: 2a) Experiments & Upgrades Emerging technologies: 4d) Photonics Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: Dr. LIPTON, Ronald
by noreply-indico-team＠cern.ch 16 Jan '14

16 Jan '14

The following email has been sent to Dr. LIPTON, Ronald: === Dear Ronald Lipton, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=14&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: Dr. LIPTON, Ronald Submitted on: 16 January 2014 15:57 Title: Performance of Three Dimensional Integrated Circuits Bonded to Sensors Abstract content We report on the processing and performance of 3D integrated circuits (3DIC) bonded to silicon sensors. The circuits were part of the Fermilab-sponsored two-tier 0.13 micron run at Tezzaron/ Global Foundries. They include designs for the CMS track trigger, ILC vertex detectors, and x-ray correlation spectroscopy. Sensors were bonded to the 3DICs using die-to-die solder ball bonding as well as with a chip-to-wafer oxide bonding process (Ziptronix DBI) similar to the wafer-to-wafer bonding process used for the 3DICs. Summary Primary Authors: Dr. LIPTON, Ronald (Fermi National Accelerator Lab. (US)) <ronald.lipton(a)cern.ch> Co-authors: Dr. DEPTUCH, Grzegorz (Fermi National Accelerator Lab. (US)) <grzegorz.wladyslaw.deptuch(a)cern.ch> HOFF, Jim (Fermilab) <jimhoff(a)fnal.gov> THOM, Julia (Cornell University (US)) <julia.thom(a)cern.ch> WITTICH, Peter (Cornell University (US)) <pw94(a)cornell.edu> YE, Zhenyu (Fermi National Accelerator Lab. (US)) <zhenyu.ye(a)cern.ch> SIDDONS, Peter (Brookhaven National Laboratory) <siddons(a)bnl.gov> Prof. TRIPATHI, Mani (University of California Davis (US)) <sudhindra.mani.tripathi(a)cern.ch> HEINTZ, Ulrich (Brown University (US)) <ulrich_heintz(a)brown.edu> NARAIN, Meenakshi (Brown University (US)) <narain(a)hep.brown.edu> Mr. YAREMA, Ray (FNAL) <yarema(a)fnal.gov> GRYBOS, Pawel (High Energy Department) <grybos(a)ftj.agh.edu.pl> SZCZYGIEL, Robert (AGH UST) <robert.szczygiel(a)agh.edu.pl> TRIMPL, Marcel (Fermilab) <trimpl(a)fnal.gov> Abstract presenters: Dr. LIPTON, Ronald Track classification: Emerging technologies: 4c) 3D integration Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: SCOTTI, Valentina
by noreply-indico-team＠cern.ch 15 Jan '14

15 Jan '14

The following email has been sent to SCOTTI, Valentina: === Dear Valentina Scotti, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=13&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: SCOTTI, Valentina Submitted on: 15 January 2014 12:31 Title: The EUSO-Balloon Instrument Abstract content EUSO-Balloon is a pathfinder mission for JEM-EUSO (Extreme Universe Space Observatory on-board the Japanese Experiment Module), the near-UV telescope proposed to be installed on board the International Space Station (ISS) before the end of this decade. The main objective of this pathfinder mission is to perform a full scale end-to-end test of all the key technologies and instrumentation of JEM-EUSO detectors and to prove the entire detection chain. The JEM-EUSO instrument consists of an UV telescope designed to focus the signal of the UV tracks generated by Extreme Energy Cosmic Rays propagating in Earth’s atmosphere, onto a finely pixelized UV camera. The EUSO-Balloon instrument, smaller respect to the one designed for the ISS, is currently developed as a payload of a stratospheric balloon operated by the French Centre National d'Études Spatiales (CNES) and will be launched during the CNES flight campaign in August 2014. This telescope will point towards the nadir from a float altitude of about 40 km. With its Fresnel Optics and Photo-Detector Module, EUSO-Balloon will monitor a 12x12° wide field of view in a wavelength range between 290 and 430 nm, at a rate of 400’000 frames/sec. In this paper, we will review the main stages of the signal processing of the EUSO-Balloon instrument: the photodetection, the analog electronics, the trigger stages, which select events while rejecting random background, the electronic acquisition system which performs the data management and the monitoring, allowing the instrument control during operation. Summary Primary Authors: SCOTTI, Valentina () <scottiv(a)na.infn.it> Dr. OSTERIA, Giuseppe (INFN NA) <osteria(a)na.infn.it> Co-authors: Abstract presenters: SCOTTI, Valentina Track classification: Experiments: 2b) Astrophysics and Space Instrumentation Data-processing: 3b) Trigger and Data Acquisition Systems Presentation type: --not specified-- Comments: for the JEM-EUSO Collaboration

1 0

[Tipp2014] [Indico] New abstract submission: CRIDER, Ben
by noreply-indico-team＠cern.ch 13 Jan '14

13 Jan '14

The following email has been sent to CRIDER, Ben: === Dear Ben Crider, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=12&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: CRIDER, Ben Submitted on: 13 January 2014 05:59 Title: Kmax-based Event Mode Data Acquisition System for the University of Kentucky Accelerator Laboratory Abstract content The University of Kentucky Acceleratory Laboratory (UKAL), a facility that possesses unique experimental capabilities for the scattering and detection of monoenergetic fast neutrons, has recently invested in updating its data acquisition capabilities. Starting with a new system for high-precision singles measurements, where subsequent analysis leads to the extraction of lifetimes in the femtosecond region via the Doppler-shift attenuation method, we have developed an event-mode coincidence data acquisition system with capabilities that allow for a new range of experiments to be performed. The Kmax-based Event Mode Data Acquisition System at UKAL utilizes existing CAMAC modules and crates, as well as the Wiener CC-USB CAMAC controller. Developed with Sparrow Corporation's Kmax 10, utilizing Java 7 and widget-based toolsheets, the system allows for high throughput with low dead times. Currently, the system is capable of supporting 40 ADCs, 32-channels of TDC, 12-channels of scaler values, and 1 Mword of in-crate memory buffering. In this presentation, the commissioning, operation, and performance of the system will be described, and the particular design choices used for the graphical user interface and the logical flow of data acquisition and translation will be discussed. This material is based on work supported by U.S. National Science Foundation under Grant No. PHY-1305801 and the U.S. Department of Energy Nuclear Energy University Programs. Summary This talk describes a recent data acquisition system update for the University of Kentucky Accelerator Laboratory (UKAL). This update allows for a new range of experiments to be performed using monoenergetic fast neutrons at UKAL. Primary Authors: Mr. CRIDER, Ben (University of Kentucky) <ben.crider(a)uky.edu> Co-authors: Prof. PIERCEY, Buz (Eastern Kentucky University) <rodney.piercey(a)eku.edu> Abstract presenters: Mr. CRIDER, Ben Prof. PIERCEY, Buz Track classification: Data-processing: 3b) Trigger and Data Acquisition Systems Presentation type: --not specified-- Comments:

1 0

[Tipp2014] industry exhibition / iseg
by Maik Donix 10 Jan '14

10 Jan '14

Dear Madam or Sir, we are very interested to exhibit our high voltage power supplies during that conference. Pls. let me know if that possibility already included into sponsorship package? Your comments in that matter would be highly appreciated. Have a great weekend! Maik Donix -- sales / Vertrieb mobil:++49 172 6569 267 iseg Spezialelektronik GmbH fon: ++49 351 269 9625 Bautzner Landstr. 23 mail: maik.donix(a)iseg-hv.de D-01454 Radeberg OT Rossendorf web: www.iseg-hv.de Geschäftsführer/Managing Director: Dr. Frank Gleisberg, Dr. Joachim Pöthig Registergericht/Lower District Court: Amtsgericht Dresden HRB 16250 Umsatzsteuer-Identnummer / VAT Id: DE 812 50 89 42 Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. This e-mail may contains confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.

1 0

[Tipp2014] [Indico] New abstract submission: WIGGERS, Leo
by noreply-indico-team＠cern.ch 08 Jan '14

08 Jan '14

The following email has been sent to WIGGERS, Leo: === Dear Leo Wiggers, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=11&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: WIGGERS, Leo Submitted on: 08 January 2014 15:39 Title: dummy2 Abstract content dummy Summary Primary Authors: WIGGERS, Leo (NIKHEF (NL)) <wiggers(a)nikhef.nl> Co-authors: Abstract presenters: WIGGERS, Leo Track classification: Sensors: 1b) Semiconductor Detectors Sensors: 1c) Gaseous Detectors Sensors: 1d) Photon Detectors Sensors: 1e) Novel technologies Experiments: 2a) Experiments & Upgrades Experiments: 2b) Astrophysics and Space Instrumentation Experiments: 2c) Detectors for neutrino physics Experiments: 2d) Dark Matter Detectors Data-processing: 3a) Front-end Electronics Data-processing: 3c) Embedded software Emerging technologies: 4a) Cooling and cryogenics Emerging technologies: 4b) MEMS Emerging technologies: 4c) 3D integration Emerging technologies: 4d) Photonics Emerging technologies: 4e) Precision engineering Technology transfer: 5a) Industry Liaisons Technology transfer: 5b) Health and healthcare Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: WIGGERS, Leo
by noreply-indico-team＠cern.ch 08 Jan '14

08 Jan '14

The following email has been sent to WIGGERS, Leo: === Dear Leo Wiggers, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=10&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: WIGGERS, Leo Submitted on: 08 January 2014 15:17 Title: Dummy Abstract content Dummy Summary Primary Authors: WIGGERS, Leo (NIKHEF (NL)) <wiggers(a)nikhef.nl> Co-authors: Abstract presenters: WIGGERS, Leo Track classification: Sensors: 1a) Calorimetry Data-processing: 3b) Trigger and Data Acquisition Systems Technology transfer: 5c) Biology&Material Science Presentation type: --not specified-- Comments: geen

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

tipp2014