- tipp2014@nikhef.nl - Nikhef Listerserver

[Tipp2014] [Indico] New abstract submission: ALBRECHT, Johannes
by noreply-indico-team＠cern.ch 06 Jan '14

06 Jan '14

The following email has been sent to ALBRECHT, Johannes: === Dear Johannes Albrecht, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=9&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: ALBRECHT, Johannes Submitted on: 06 January 2014 08:12 Title: The LHCb trigger system: performance and outlook Abstract content The LHCb experiment is a spectrometer dedicated to the study of heavy flavor at the LHC. The rate of proton-proton collisions at the LHC is 15 MHz, of which only 5 kHz can be written to storage for offline analysis. For this reason the trigger system plays a key role in selecting signal events and rejecting background. In contrast to previous experiments at hadron colliders, the bulk of the LHCb trigger is implemented in software and deployed on a farm of 20k parallel processing nodes. This system, called the High Level Trigger (HLT) is responsible for reducing the rate from the maximum at which the detector can be read out, 1.1 MHz, to the 5 kHz which can be processed offline. The inherent flexibility of this software trigger allowed LHCb to run at twice its design luminosity in 2012. Simultaneously, the HLT performed far beyond the nominal design in terms of signal efficiencies, in particular for charm physics. It also showcased a number of pioneering concepts, for example: the deployment of an inclusive multivariate B-hadron tagger as the main physics trigger of the experiment, buffering of events to local disks, and simulation-free event-by-event trigger efficiency corrections. This talk will cover the design and performance of the LHCb trigger system, and discuss planned improvements beyond LS1 as well as plans for the LHCb upgrade trigger. Summary Primary Authors: ALBRECHT, Johannes (Technische Universitaet Dortmund (DE)) <johannes.albrecht(a)cern.ch> RAVEN, Gerhard (NIKHEF (NL)) <gerhard.raven(a)nikhef.nl> GLIGOROV, Vladimir (CERN) <vladimir.gligorov(a)cern.ch> Co-authors: Abstract presenters: ALBRECHT, Johannes RAVEN, Gerhard GLIGOROV, Vladimir Track classification: Data-processing: 3b) Trigger and Data Acquisition Systems Presentation type: --not specified-- Comments:

1 0

[Tipp2014] Financed Printing for TIPP2014
by Patrick Gabriel 06 Jan '14

06 Jan '14

Dear Mr. van Bakel : I am contacting you concerning your upcoming Event: TIPP2014. We offer a completely FREE SERVICE whereby we will handle all the page-layout, Printing and Delivery of your Event Publications be they Congress Catalogs, Event Handbooks or Abstract Books. We fully finance and handle all page layout, publishing, printing, and even delivery of your event publication saving you a great deal of time and expense. We have many years experience in producing high quality publications for our client Organizations based on their diverse needs. Furthermore, we do not compete with any existing Sponsorship arrangement and the publication remains fully your property. Samples of some prior examples can be found at: http://www.eventsonsocial.com/oursamples Our company, OSC-EventsOnSocial, is the Specialist when it comes to helping Organizations promote and market their events using Social Media and Online Marketing. Whether your goal is to educate and inform your market about your event, drive word of mouth or drive repeat or more attendees, we are your answer. We are Specialists are Crafting and Executing Event Social Marketing Plans : Using Social Media to Promote Your EventsTo Share AnnouncementsTo Increase Conversations About Your EventTo Drive Engagement Around Your EventFor Organization and Event BrandingPlease also feel free to consult our website to find a more detailed presentation of our services. More information can be found at: http://www.eventsonsocial.com Please feel free to contact me should you have any questions.Thanking you in advance.Best Regards,Patrick Gabriel OSC-Events on Social Phone: +33.1.83.62.48.58 Email: pgabriel(a)osc-associates.com OSC-Events on Social (Europe) 12 Place Carnot, 93110 Rosny Sous Bois, France Tel: (+33) 01 83 62 48 58 Fax: (+33) 01 77 72 27 59 OSC-Events on Social (North America) 269 S. Beverly Drive, Suite 630, Beverly Hills, CA 90212, USA Tel: (+1) 310-878-9534 Fax: (+1) 310-861-1986 Email: contact(a)eventsonsocial.com

1 0

[Tipp2014] Technology and Instrumentation in Particle Physics '14
by Jeff Barden 03 Jan '14

03 Jan '14

Hi Please forward information and prices to exhibit at the Technology and Instrumentation in Particle Physics '14 Jeff Barden Technical Sales MDC Vacuum Ltd 3 Horsted Square Bellbrook Industrial Estate Uckfield, East Sussex TN22 1QG ' +44 (0)1825 280454 È +44 (0)7920 114801

1 0

[Tipp2014] Financed Printing for TIPP2014
by Patrick Gabriel 23 Dec '13

23 Dec '13

Dear Mr. van Bakel : I recently sent you an email offering free printing for your upcoming Event: TIPP2014. Can you please advise if our offer is of interest to you. Please feel free to contact me should you have any questions.Thanking you in advance.Best Regards,Patrick Gabriel OSC-Events on Social Phone: +33.1.83.62.48.58 Email: pgabriel(a)osc-associates.com OSC-Events on Social (Europe) 12 Place Carnot, 93110 Rosny Sous Bois, France Tel: (+33) 01 83 62 48 58 Fax: (+33) 01 77 72 27 59 OSC-Events on Social (North America) 269 S. Beverly Drive, Suite 630, Beverly Hills, CA 90212, USA Tel: (+1) 310-878-9534 Fax: (+1) 310-861-1986 Email: contact(a)eventsonsocial.com Previously Sent Email:---------------------------------------------------------------------------------------------------------------------------------------------------------- Dear Mr. van Bakel : I am contacting you concerning your upcoming Event: TIPP2014. We offer a completely FREE SERVICE whereby we will handle all the page-layout, Printing and Delivery of your Event Publications be they Congress Catalogs, Event Handbooks or Abstract Books. We fully finance and handle all page layout, publishing, printing, and even delivery of your event publication saving you a great deal of time and expense. We have many years experience in producing high quality publications for our client Organizations based on their diverse needs.Samples of some prior examples can be found at: http://www.eventsonsocial.com/oursamples Our company, OSC-EventsOnSocial, is the Specialist when it comes to helping Organizations promote and market their events using Social Media and Online Marketing. Whether your goal is to educate and inform your market about your event, drive word of mouth or drive repeat or more attendees, we are your answer. We are Specialists are Crafting and Executing Event Social Marketing Plans : Using Social Media to Promote Your EventsTo Share AnnouncementsTo Increase Conversations About Your EventTo Drive Engagement Around Your EventFor Organization and Event BrandingPlease also feel free to consult our website to find a more detailed presentation of our services. More information can be found at: http://www.eventsonsocial.com Please feel free to contact me should you have any questions.Thanking you in advance.Best Regards,Patrick GabrielOSC-Events on Social Phone: +33.1.83.62.48.58 Email: pgabriel(a)osc-associates.com OSC-Events on Social (Europe) 12 Place Carnot, 93110 Rosny Sous Bois, France Tel: (+33) 01 83 62 48 58 Fax: (+33) 01 77 72 27 59 OSC-Events on Social (North America) 269 S. Beverly Drive, Suite 630, Beverly Hills, CA 90212, USA Tel: (+1) 310-878-9534 Fax: (+1) 310-861-1986 Email: contact(a)eventsonsocial.com

1 0

[Tipp2014] Sponsoring
by Rosner, Annika 19 Dec '13

19 Dec '13

Dear Arjen van Rijn, we are thinking of a sponsoring at the TIPP 2014. Could you please give me some more information than what I found on the webpage? Kind regards, Annika Rosner ------------------------------------------------------------------------ - Dipl-Inf. Annika Rosner Deutsches Elektronen-Synchrotron DESY A Research Centre of the Helmholtz Association Notkestr. 85 22607 Hamburg Germany phone: +49-40-8998-1957 e-mail: annika.rosner(a)desy.de web: http://www.desy.de/index_eng.html

1 0

[Tipp2014] Financed Printing for TIPP2014
by Patrick Gabriel 16 Dec '13

16 Dec '13

Dear Mr. van Bakel : I recently sent you an email offering free printing for your upcoming Event: TIPP2014. Can you please advise if our offer is of interest to you. Please feel free to contact me should you have any questions.Thanking you in advance.Best Regards,Patrick Gabriel OSC-Events on Social Phone: +33.1.83.62.48.58 Email: pgabriel(a)osc-associates.com OSC-Events on Social (Europe) 12 Place Carnot, 93110 Rosny Sous Bois, France Tel: (+33) 01 83 62 48 58 Fax: (+33) 01 77 72 27 59 OSC-Events on Social (North America) 269 S. Beverly Drive, Suite 630, Beverly Hills, CA 90212, USA Tel: (+1) 310-878-9534 Fax: (+1) 310-861-1986 Email: contact(a)eventsonsocial.com Previously Sent Email:---------------------------------------------------------------------------------------------------------------------------------------------------------- Dear Mr. van Bakel : I am contacting you concerning your upcoming Event: TIPP2014. We offer a completely FREE SERVICE whereby we will handle all the page-layout, Printing and Delivery of your Event Publications be they Congress Catalogs, Event Handbooks or Abstract Books. We fully finance and handle all page layout, publishing, printing, and even delivery of your event publication saving you a great deal of time and expense. We have many years experience in producing high quality publications for our client Organizations based on their diverse needs.Samples of some prior examples can be found at: http://www.eventsonsocial.com/oursamples Our company, OSC-EventsOnSocial, is the Specialist when it comes to helping Organizations promote and market their events using Social Media and Online Marketing. Whether your goal is to educate and inform your market about your event, drive word of mouth or drive repeat or more attendees, we are your answer. We are Specialists are Crafting and Executing Event Social Marketing Plans : Using Social Media to Promote Your EventsTo Share AnnouncementsTo Increase Conversations About Your EventTo Drive Engagement Around Your EventFor Organization and Event BrandingPlease also feel free to consult our website to find a more detailed presentation of our services. More information can be found at: http://www.eventsonsocial.com Please feel free to contact me should you have any questions.Thanking you in advance.Best Regards,Patrick GabrielOSC-Events on Social Phone: +33.1.83.62.48.58 Email: pgabriel(a)osc-associates.com OSC-Events on Social (Europe) 12 Place Carnot, 93110 Rosny Sous Bois, France Tel: (+33) 01 83 62 48 58 Fax: (+33) 01 77 72 27 59 OSC-Events on Social (North America) 269 S. Beverly Drive, Suite 630, Beverly Hills, CA 90212, USA Tel: (+1) 310-878-9534 Fax: (+1) 310-861-1986 Email: contact(a)eventsonsocial.com

1 0

[Tipp2014] [Indico] New abstract submission: RODRIGUES FIGUEIREDO, Eduardo
by noreply-indico-team＠cern.ch 11 Dec '13

11 Dec '13

The following email has been sent to RODRIGUES FIGUEIREDO, Eduardo: === Dear Eduardo Rodrigues Figueiredo, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=8&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: RODRIGUES FIGUEIREDO, Eduardo Submitted on: 11 December 2013 16:18 Title: Upgrade of the LHCb Vertex Locator Abstract content The upgrade of the LHCb experiment, planned for 2018, will transform the entire readout to a trigger-less system operating at 40 MHz. All data reduction algorithms will be executed in a high-level software farm, with access to all event information. This will enable the detector to run at luminosities of 1-2 x1033 /cm2/s and probe physics beyond the Standard Model in the heavy sector with unprecedented precision. The upgraded VELO must be low mass, radiation hard and vacuum compatible. It must be capable of fast pattern recognition and track reconstruction and will be required to drive data to the outside world at speeds of up to 3 Tbit/s. This challenge is being met with a new VELO design based on hybrid pixel detectors positioned to within 5 mm of the LHC colliding beams. The sensors have 55 x 55 m2 pixels and the VELOPix ASIC which is being developed for the readout is based on the Timepix/Medipix family of chips. The hottest ASIC will have to cope with pixel hit rates of up to 900 MHz. The material budget will be optimised with the use of evaporative CO2 coolant circulating in microchannels within a thin silicon substrate. Microchannel cooling brings many advantages: very efficient heat transfer with almost no temperature gradients across the module, no CTE mismatch with silicon components, and low material contribution. This is a breakthrough technology being developed for LHCb. LHCb is also focussing effort on the construction of a lightweight foil to separate the primary and secondary LHC vacua, the development of high speed cables, and the metallisation and radiation qualification of the module. The 40 MHz readout will also bring significant conceptual changes to the way in which the upgrade trigger is operated. Work is in progress to incorporate momentum and impact parameter information into the trigger at the earliest possible stage, using the fast pattern recognition capabilities of the upgraded detector. The current status of the VELO upgrade will be described together with a presentation of recent test results. Summary Primary Authors: Dr. RODRIGUES, Eduardo (University of Manchester (GB)) <eduardo.rodrigues(a)cern.ch> Co-authors: Abstract presenters: Dr. RODRIGUES, Eduardo Track classification: Sensors: 1b) Semiconductor Detectors Experiments: 2a) Experiments & Upgrades Presentation type: --not specified-- Comments: Abstract sent on behalf of the vertex locator group of LHCb. If the abstract is accepted, and once a suitable speaker is then found, he/she will then register to the conference.

1 0

[Tipp2014] [Indico] New abstract submission: RODRIGUES FIGUEIREDO, Eduardo
by noreply-indico-team＠cern.ch 11 Dec '13

11 Dec '13

The following email has been sent to RODRIGUES FIGUEIREDO, Eduardo: === Dear Eduardo Rodrigues Figueiredo, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=7&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: RODRIGUES FIGUEIREDO, Eduardo Submitted on: 11 December 2013 16:13 Title: Performance and Radiation Damage Effects in the LHCb Vertex Locator Abstract content LHCb is a dedicated experiment to study New Physics in the decays of heavy hadrons at the LHC. Heavy hadrons are identified through their flight distance in the Vertex Locator (VELO), hence the detector is critical for both the trigger and offline physics analyses. The VELO is the retractable silicon-strip detector surrounding the LHCb interaction point. It is located only 7 mm from the LHC beam during normal LHC operation, once moved into its closed position for each LHC fill when stable beams are obtained. During insertion the detector is centred around the LHC beam by the online reconstruction of the primary vertex position. Both VELO halves comprise 21 silicon micro-strip modules each. A module is made of two n+-on-n 300 µm thick half-disc sensors with R-measuring and -measuring micro-strip geometry, mounted on a carbon fibre support paddle. The minimum pitch is approximately 40 µm. The detector is also equipped with the only n-on-p sensors operating at the LHC. The detectors are operated in vacuum and a bi-phase CO2 cooling system is used. The signals read out with analogue front-end chips are subsequently processed by a set of algorithms in FPGA processing boards. The VELO has been performing very successfully during the first run of the LHC in 2010-12. Possible effects of radiation damage have been monitored and studied in detail throughout this period. Indeed the VELO module sensors receive a large and non-uniform radiation dose having inner and outer radii of only 7 and 42 mm, respectively. A maximum dose of 1.2 x 1014 1 MeV neutron equivalent /cm2 was received in the innermost region of the sensors for the combined 2010-12 run I (3.4 fb-1 of delivered data). Being operated in an extreme and highly non-uniform radiation environment, type-inversion of the inner part of the n-on-n sensors has already been measured. The radiation damage in the detector is monitored and studied in three ways: (1) dependence of sensor currents on voltage and temperature; (2) measurement of the effective depletion voltage of the sensors from the charge collection efficiency and from studying the noise versus voltage behaviour; and (3) cluster finding efficiency. Results will be presented in all three areas with the most recent results from the full run I. Summary Overview of the performance and radiation damage studies performed on the LHCb experiment vertex locator during the first run of the LHC. Primary Authors: Dr. RODRIGUES, Eduardo (University of Manchester (GB)) <eduardo.rodrigues(a)cern.ch> Co-authors: Abstract presenters: Dr. RODRIGUES, Eduardo Track classification: Sensors: 1b) Semiconductor Detectors Experiments: 2a) Experiments & Upgrades Presentation type: --not specified-- Comments: Abstract sent on behalf of the vertex locator group of LHCb. If the abstract is accepted, and once a suitable speaker is then found, he/she will then register to the conference.

1 0

[Tipp2014] TIPP14 - Question
by michalu＠man.poznan.pl 10 Dec '13

10 Dec '13

Dear TIPP14 Organisers, There is a mobile app - Conference4me that I believe could be very useful for the TIPP14 participants. I'm the project member of the application Conference4Me (Conference Mobile Assistant), that facilitates participation in the conferences and exhibitions, developed for Android and iOS platform at Poznan Supercomputing and Networking Center. The conference organizers do not need to do any work related to the mobile version of conference agenda. Agenda in a mobile version is created by Conference4me team based on a shared program of conference and the conference website. This application provides following features: * Access to up to date agenda (workshops, tracks, sessions, speeches, speakers, posters, ) * Easy access to conference’s key information (venue, accommodation, sponsors etc.) * Built in conference’s venue maps, plans * Offline functionality. Application does not required active Internet connection for browsing conference related information * Conference content (sessions, events, abstracts, links to presentations, etc.) * Conference news (delivered via Twitter) * Integration with most popular conference management systems like EDAS, Conftool, OpenConf, Indico, Paperplaza Conference4me provides also information about exhibitions accompanying conferences. * Built in exhibition maps, easy navigation * Data about hundreds of exhibitors, their contacts, location on exhibition maps * Voting for the best exhibitor * easy search mechanism This application have been successfully used by participants of many events, for example: - Future Internet Week and Future Internet Event 2011, October 2011 Poznan ( 32 conferences and workshops, more then 1000 participants), - IEEE e–Science 2011 Stockholm (200 participants), December 2011, - CHEP 2012 - New York, June 2012 (400 participants), - International Conference on Computational Science(ICCS 2012), 4-6 June 2012, Omaha, Nebraska, U.S. (400 participants) - International Supercomputing - ISC'12 , exhibition and conference, June 2012 , Hamburg, Niemcy (about 2500 participants), - 6th International Conference on High Energy Physics (ICHEP 2012) 4-11 July, 2012 Melbourne, Australia. - 8th IEEE, IET Int. Symposium on Communication Systems, Networks and Digital Signal Processing, 18th-20th July, Poznan , Poland - Quark Matter 2012 International Conference, Aug 2012, Washington, DC -2nd IEEE International Conference on Consumer Electronics - Berlin, September 2012, Germany - ICT Proposers' Day, 26-27 September 2012, Warsaw, Poland - Federated Conference On Computer Science and Information Systems, FedCSiS (32 Workshops), 9-12.09. 2012, Wrocław, Poland - The 24th IAEA Fusion Energy Conference, 8-13 October 2012. San Diego, USA - 2012 Nuclear Science Symposium, Medical Imaging Conference, October 29 - November 3, 2012, Anaheim, California - SE 13 - Software Engineering 2013, 26 Feb - 01 Mar, Aachen, Germany - VCI 2013 - 11-15 February, Vienna, Austria - EGI Community Forum 2013, 8-12 April, Manchester, UK - ICRA 2013, 6-10 May, Karlsruhe, Germany - ICCS 2013, 5-7 June, Barcelona, Spain - ISC 2013, 16-20 June, Leipzig, Germany - 8th International Conference: Researching Work and Learning, 19-22 June, UK - ECER 2013, 09-13 September, Istanbul - CHEP 2013, 14-18 October, Amsterdam - ICT 2013 - Create, Connect, Grow 2013, 6-8 November 2013 (6000 participants) - and many more... You can check full list of conferences on our website - Conference4me webpage: http://conference4me.eu - You can find here demo http://conference4me.eu/features - You can try it out: Installation: Type Conference4me in Google Play or in iTunes App Store Please let me know if you are interested in using this application. Best regards Michał Urbaniak michalu(a)man.poznan.pl

1 0

[Tipp2014] Financed Printing for TIPP2014
by Patrick Gabriel 09 Dec '13

09 Dec '13

Dear Mr. van Bakel : I am contacting you concerning your upcoming Event: TIPP2014. We offer a completely FREE SERVICE whereby we will handle all the page-layout, Printing and Delivery of your Event Publications be they Congress Catalogs, Event Handbooks or Abstract Books. We fully finance and handle all page layout, publishing, printing, and even delivery of your event publication saving you a great deal of time and expense. We have many years experience in producing high quality publications for our client Organizations based on their diverse needs. Furthermore, we do not compete with any existing Sponsorship arrangement and the publication remains fully your property. Samples of some prior examples can be found at: http://www.eventsonsocial.com/oursamples Our company, OSC-EventsOnSocial, is the Specialist when it comes to helping Organizations promote and market their events using Social Media and Online Marketing. Whether your goal is to educate and inform your market about your event, drive word of mouth or drive repeat or more attendees, we are your answer. We are Specialists are Crafting and Executing Event Social Marketing Plans : Using Social Media to Promote Your EventsTo Share AnnouncementsTo Increase Conversations About Your EventTo Drive Engagement Around Your EventFor Organization and Event BrandingPlease also feel free to consult our website to find a more detailed presentation of our services. More information can be found at: http://www.eventsonsocial.com Please feel free to contact me should you have any questions.Thanking you in advance.Best Regards,Patrick GabrielOSC-Events on Social Phone: +33.1.83.62.48.58 Email: pgabriel(a)osc-associates.com OSC-Events on Social (Europe) 12 Place Carnot, 93110 Rosny Sous Bois, France Tel: (+33) 01 83 62 48 58 Fax: (+33) 01 77 72 27 59 OSC-Events on Social (North America) 269 S. Beverly Drive, Suite 630, Beverly Hills, CA 90212, USA Tel: (+1) 310-878-9534 Fax: (+1) 310-861-1986 Email: contact(a)eventsonsocial.com

1 0

[Tipp2014] Financed Printing for TIPP2014
by Patrick Gabriel 09 Dec '13

09 Dec '13

Dear Mr. van Bakel : I recently sent you an email offering free printing for your upcoming Event: TIPP2014. Can you please advise if our offer is of interest to you. Please feel free to contact me should you have any questions.Thanking you in advance.Best Regards,Patrick GabrielOSC-Events on Social Phone: +33.1.83.62.48.58 Email: pgabriel(a)osc-associates.com OSC-Events on Social (Europe) 12 Place Carnot, 93110 Rosny Sous Bois, France Tel: (+33) 01 83 62 48 58 Fax: (+33) 01 77 72 27 59 OSC-Events on Social (North America) 269 S. Beverly Drive, Suite 630, Beverly Hills, CA 90212, USA Tel: (+1) 310-878-9534 Fax: (+1) 310-861-1986 Email: contact(a)eventsonsocial.com Previously Sent Email:---------------------------------------------------------------------------------------------------------------------------------------------------------- Dear Mr. van Bakel : I am contacting you concerning your upcoming Event: TIPP2014. We offer a completely FREE SERVICE whereby we will handle all the page-layout, Printing and Delivery of your Event Publications be they Congress Catalogs, Event Handbooks or Abstract Books. We fully finance and handle all page layout, publishing, printing, and even delivery of your event publication saving you a great deal of time and expense. We have many years experience in producing high quality publications for our client Organizations based on their diverse needs.Samples of some prior examples can be found at: http://www.eventsonsocial.com/oursamples Our company, OSC-EventsOnSocial, is the Specialist when it comes to helping Organizations promote and market their events using Social Media and Online Marketing. Whether your goal is to educate and inform your market about your event, drive word of mouth or drive repeat or more attendees, we are your answer. We are Specialists are Crafting and Executing Event Social Marketing Plans : Using Social Media to Promote Your EventsTo Share AnnouncementsTo Increase Conversations About Your EventTo Drive Engagement Around Your EventFor Organization and Event BrandingPlease also feel free to consult our website to find a more detailed presentation of our services. More information can be found at: http://www.eventsonsocial.com Please feel free to contact me should you have any questions.Thanking you in advance.Best Regards,Patrick GabrielOSC-Events on Social Phone: +33.1.83.62.48.58 Email: pgabriel(a)osc-associates.com OSC-Events on Social (Europe) 12 Place Carnot, 93110 Rosny Sous Bois, France Tel: (+33) 01 83 62 48 58 Fax: (+33) 01 77 72 27 59 OSC-Events on Social (North America) 269 S. Beverly Drive, Suite 630, Beverly Hills, CA 90212, USA Tel: (+1) 310-878-9534 Fax: (+1) 310-861-1986 Email: contact(a)eventsonsocial.com

1 0

[Tipp2014] SURF***SPAM***9.3 Wire Mesh
by Alice 04 Dec '13

04 Dec '13

Dear Purchasing Manager， Good day to you. We produce wire mesh products with high quality & very competitive price for 17 years in China; Hope to find a way to cooperate with you. Our Products such as: Welded wire mesh Security Fence Stainless Steel Wire Mesh Chain Link Fence Europe Style Fence Hexagonal Wire Netting Tortoise Shell Mesh Gabion basket Storage Equipment Steel Grating Temporary Fence Stainless Steel wire mesh gloves Write me back please; Let’s talk more in details.Thank you. Best Regards Yours sincerely Alice Hebei Sengong Metal Product Co., Ltd Email: wiremesh(a)hbsengong.com sengong01(a)vip.sina.com Skype： alice_bai18 MSN: alice9999(a)msn.cn QQ:378516283 Tel: 86-311-85362224 Fax: 8631185362224 http://www.hbsengong.com

1 0

[Tipp2014] SURF***SPAM***7.8 Wire Mesh Products
by Alice 02 Dec '13

02 Dec '13

Dear Purchasing Manager， Good day to you. We produce wire mesh products with high quality & very competitive price for 17 years in China; Hope to find a way to cooperate with you. Our Products such as: Welded wire mesh Security Fence Stainless Steel Wire Mesh Chain Link Fence Europe Style Fence Hexagonal Wire Netting Tortoise Shell Mesh Gabion basket Storage Equipment Steel Grating Temporary Fence Stainless Steel wire mesh gloves Write me back please; Let’s talk more in details.Thank you. Best Regards Yours sincerely Alice Hebei Sengong Metal Product Co., Ltd Email: wiremesh(a)hbsengong.com sengong01(a)vip.sina.com Skype： alice_bai18 MSN: alice9999(a)msn.cn QQ:378516283 Tel: 86-311-85362224 Fax: 8631185362224 http://www.hbsengong.com

1 0

[Tipp2014] [Indico] New abstract submission: YOO, Jonghee
by noreply-indico-team＠cern.ch 26 Nov '13

26 Nov '13

The following email has been sent to YOO, Jonghee: === Dear Jonghee Yoo, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=6&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: YOO, Jonghee Submitted on: 26 November 2013 19:04 Title: Solid Xenon Particle Detector Abstract content The solid (crystallin) phase of xenon possesses many of the same advantages of liquid xenon as a particle detector material including good transparency, self-shielding, low intrinsic background, and high scintillation light yield. Many of the properties of solid xenon have been measured previously employing small volumes and thin films. Two major R&D issues must be addressed to make a solid xenon particle detector; the demonstration of the scalability of solid xenon and the capability to readout solid xenon signals. Both issues are being addressed with a dedicated cryogenic system at Fermilab. The first phase of this project entailed growing approximately a kilogram of transparent solid phase xenon and was successfully completed in 2010 at Fermilab. The second phase of this project is underway where the signals from scintillation light and electron drift in solid xenon, and more aggressively the crystallography of the solid xenon. In this talk, we will report the recent results of the solid xenon detector R&D at Fermilab. Summary Primary Authors: YOO, Jonghee (Fermilab) <yoo(a)fnal.gov> Co-authors: Abstract presenters: YOO, Jonghee Track classification: Sensors: 1e) Novel technologies Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: YOO, Jonghee
by noreply-indico-team＠cern.ch 26 Nov '13

26 Nov '13

The following email has been sent to YOO, Jonghee: === Dear Jonghee Yoo, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=5&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: YOO, Jonghee Submitted on: 26 November 2013 19:01 Title: CENNS: A new method for measuring Coherent Elastic Neutrino Nucleus Scattering Abstract content A recent study showed background limits to future dark matter searches coming from Coherent Elastic Neutrino Nucleus Scattering (CENNS) interactions of astrophysical and atmospheric neutrinos. There are a few possible ways to improve the limits by using directional measurements of the neutrino interactions and/or measuring time variation of the interactions. However, this CENNS background limit is a robust lower bound which can not be substantially reduced. Measuring the CENNS cross section and performing subsequent tests of higher energy neutrino interactions on various target materials will be extremely beneficial to future dark matter experiments. We present a experimental method for measuring the process of CENNS. This method uses a low-energy threshold detector situated transverse to a high energy neutrino beam production target. This detector would be sensitive to the low energy neutrinos arising from pion decays-at-rest in the target. In this talk we will present the results of the beam induced background measurement, detector R&D and systematic uncertainties. Summary Primary Authors: Dr. YOO, Jonghee (Fermilab) <yoo(a)fnal.gov> Co-authors: Abstract presenters: Dr. YOO, Jonghee Track classification: Experiments: 2c) Detectors for neutrino physics Presentation type: --not specified-- Comments:

1 0

[Tipp2014] Your new contact form
by service＠foxyform.com 20 Nov '13

20 Nov '13

1 0

[Tipp2014] [Indico] New abstract submission: Dr. HAST, Carsten
by noreply-indico-team＠cern.ch 19 Nov '13

19 Nov '13

The following email has been sent to Dr. HAST, Carsten: === Dear Carsten Hast, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=4&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: Dr. HAST, Carsten Submitted on: 19 November 2013 02:23 Title: Electron Test Beams at SLAC Abstract content We present the current status and plans of the various electron test beams available at SLAC National Accelerator Laboratory. They span an energy range of a few MeV in our ASTA, mainly used for gun development and RF structure testing, NLCTA, a 120 to 200 MeV linac for free electron laser seeding, dielectric laser acceleration and medical studies, to ESTB, the End Station (A) Test Beam, which uses 5 Hz of the LCLS 2 to 16GeV beam for ILC MDI and detector R&D studies with primary beam and singel electrons, to FACET, which has a very compressed and small spot size 20GeV beam for plasma wakefield acceleration, material science and other advanced acceleration concepts studies. For all these facilities an overview of past, present and future experiments and plans will be given. Summary Primary Authors: Dr. HAST, Carsten (SLAC) <hast(a)slac.stanford.edu> Co-authors: Abstract presenters: Dr. HAST, Carsten Track classification: Sensors: 1e) Novel technologies Experiments: 2a) Experiments & Upgrades Presentation type: --not specified-- Comments: This is a suggested facilities talk, I am not quite sure what the right category to choose is for that.

1 0

[Tipp2014] submission of abstract
by Johannes Albrecht 13 Nov '13

13 Nov '13

Dear TIPP organisers, i would like to upload an abstract for a talk on the LHCb HLT for TIPP14, should i do this via mail to you or is there a web-page which i missed? many thanks in advance Johannes Albrecht for the LHCb Trigger project

1 0

[Tipp2014] [Indico] New abstract submission: SOHA, Aria
by noreply-indico-team＠cern.ch 12 Nov '13

12 Nov '13

The following email has been sent to SOHA, Aria: === Dear Aria Soha, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=3&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: SOHA, Aria Submitted on: 12 November 2013 19:26 Title: Dark Matter Detector Prototype testing area Underground Abstract content Located 350 feet beneath the surface the MINOS Underground Areas, at Fermilab provide a useful shallow testing site for Dark Matter Detector R&D. It is accessible 24hrs/day, 365 days/year, under normal circumstances, with minimal training. The area is fully supported by Fermilab staff and resources, including network capabilities and other utilities. It has been used by the DAMIC and COUPP experiments to trouble shoot problems before moving to the deeper and less accessible SNOLAB. Other notable test experiments include DM-Ice, Sci-Bath, Peanut, and ArgoNeuT. Summary Primary Authors: Dr. LEE, Bill (Fermilab) <billl(a)fnal.gov> SOHA, Aria (Fermilab) <aria(a)fnal.gov> Co-authors: Abstract presenters: Dr. LEE, Bill Track classification: Sensors: 1e) Novel technologies Experiments: 2a) Experiments & Upgrades Experiments: 2c) Detectors for neutrino physics Experiments: 2d) Dark Matter Detectors Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: SOHA, Aria
by noreply-indico-team＠cern.ch 11 Nov '13

11 Nov '13

The following email has been sent to SOHA, Aria: === Dear Aria Soha, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=2&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: SOHA, Aria Submitted on: 11 November 2013 22:55 Title: MWPC Tracking System Upgrade Abstract content The Multiwire Proportional Chamber Tracking System at the Fermilab Test Beam Facility has been upgraded. Improvements include a renovation of the chambers themselves to vastly improve noise on the signals. An extensive study was done to find the most efficient gas for operation, and a completely new electronics read-out system has been created to improve reliability, and system compatibility. Users can now have an ASCII file for each run to merge into their DAQ system, and an event display. Summary The Multiwire Proportional Chamber Tracking System at the Fermilab Test Beam Facility has been upgraded. Improvements include a renovation of the chambers themselves to vastly improve noise on the signals. An extensive study was done to find the most efficient gas for operation, and a completely new electronics read-out system has been created to improve reliability, and system compatibility. Users can now have an ASCII file for each run to merge into their DAQ system, and an event display. Primary Authors: SKUP, Ewa (Fermilab) <eskup(a)fnal.gov> Co-authors: SOHA, Aria (Fermilab) <aria(a)fnal.gov> Abstract presenters: SKUP, Ewa Track classification: Sensors: 1c) Gaseous Detectors Experiments: 2a) Experiments & Upgrades Data-processing: 3a) Front-end Electronics Data-processing: 3b) Trigger and Data Acquisition Systems Presentation type: --not specified-- Comments: This could also be part of a Test Beam track

1 0

[Tipp2014] [Indico] New abstract submission:
by noreply-indico-team＠cern.ch 11 Nov '13

11 Nov '13

The following email has been sent to : === Dear , The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=1&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: Submitted on: 11 November 2013 22:22 Title: New High Rate Tracking area Abstract content A new area for beam tests of high rate tracking devices is being commissioned at the Fermilab Test Beam Facility. The new area is in the MTest beam line upstream of the pinhole collimator in the MT3 Alcove. This area is suitable for tests of detectors with modest transverse dimensions. High rate tests will use 120 GeV protons. The maximum rate available is approximately 2.5 GHz/cm2(1E10 particles/spill). A Patch panel for signal and high voltage cables links the enclosure alcove area with the MS3 service building, where experimenters can monitor their apparatus. Network fiber is installed between the two areas, with capabilities for general network access and private network capabilities. A remotely controllable motion table is available so users can perform beam scans, and move detectors completely into and out of the beam, without making accesses to the beam enclosure. Summary A new area for beam tests of high rate tracking devices is being commissioned at the Fermilab Test Beam Facility. The new area is in the MTest beam line upstream of the pinhole collimator in the MT3 Alcove. This area is suitable for tests of detectors with modest transverse dimensions. High rate tests will use 120 GeV protons. The maximum rate available is approximately 2.5 GHz/cm2(1E10 particles/spill). A Patch panel for signal and high voltage cables links the enclosure alcove area with the MS3 service building, where experimenters can monitor their apparatus. Network fiber is installed between the two areas, with capabilities for general network access and private network capabilities. A remotely controllable motion table is available so users can perform beam scans, and move detectors completely into and out of the beam, without making accesses to the beam enclosure. Primary Authors: SOHA, Aria (Fermilab) <aria(a)fnal.gov> Co-authors: Abstract presenters: SOHA, Aria Track classification: Sensors: 1b) Semiconductor Detectors Sensors: 1c) Gaseous Detectors Sensors: 1e) Novel technologies Experiments: 2a) Experiments & Upgrades Presentation type: --not specified-- Comments: Would also be appropriate for a Test Beam category.

1 0

[Tipp2014] [Indico] New abstract submission:
by noreply-indico-team＠cern.ch 11 Nov '13

11 Nov '13

The following email has been sent to : === Dear , The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=0&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: Submitted on: 11 November 2013 22:14 Title: Improvements to the Fermilab Test Beam Facility Abstract content The Fermilab Test Beam Program provides flexible, equal, and open access to test beams for all detector tests, with relatively low bureaucratic overhead and a guarantee of safety, coordination, and oversight. The facility provides a multitude of particle and energy types, as well as an array of instrumentation with an extensive infrastructure. Recently Fermilab went through a 14 month downtime for accelerator and facility upgrades. During this time, many extensive upgrades were made to the facility including temperature regulation, remote control systems, and instrumentation upgrades. Summary The Fermilab Test Beam Program provides flexible, equal, and open access to test beams for all detector tests, with relatively low bureaucratic overhead and a guarantee of safety, coordination, and oversight. The facility provides a multitude of particle and energy types, as well as an array of instrumentation with an extensive infrastructure. Recently Fermilab went through a 14 month downtime for accelerator and facility upgrades. During this time, many extensive upgrades were made to the facility including temperature regulation, remote control systems, and instrumentation upgrades. Patch Panel, Cable, & Network Upgrade Insulation of MT6.2 Enclosure Addition of 2C hut Camera Upgrade Alignment Laser Upgrade Communication System Upgrade Tracking System Upgrade Control Rooms re-configuration Electronics Room Re-configuration Motion Table Control System Upgrade Primary Authors: SOHA, Aria (Fermilab) <aria(a)fnal.gov> Co-authors: Abstract presenters: SOHA, Aria Track classification: Sensors: 1a) Calorimetry Sensors: 1b) Semiconductor Detectors Sensors: 1c) Gaseous Detectors Sensors: 1d) Photon Detectors Sensors: 1e) Novel technologies Experiments: 2a) Experiments & Upgrades Presentation type: --not specified-- Comments: Would belong in a Test Beams track

1 0

[Tipp2014] SURF***SPAM***6.2 Technology Users List- 2013
by Sally Marshall 08 Nov '13

08 Nov '13

Hi, Would you be interested in acquiring any of the following Technology Users List contact information at this time for your lead generation, sales growth, email campaign or other marketing initiatives? Technology Users Like: Technology Partners include independent software vendors (ISVs), SaaS, PaaS, developer tools, management and security vendors.System Integrators (SIs), strategic consultancies, resellers, agencies and value-added retailers/resellers (VARs), VMware, Microsoft HyperV, WebEx, Amazon Web Services, Rackspace, Salesforce, SAP, Oracle Database, Oracle e-Business Suit, PeopleSoft, JD Edwards, Siebel, Hyperion, Microsoft Dynamic AX/NAV/GP/CRM, Exchange Server, Share Point, .Net, Biz Talk, IBM Lotus Notes, File Net, Mainframe, Tivoli, Web Sphere, Cognos, Sage, MAS 90/200, AMDOCS/Clarify, QuickBooks, Salesforce.com, Peachtree, Net Suite, Remedy, Baan, Mapics Application and many more. Information fields: Contact Name, Job Title, Email Address, Phone Number, Fax Number, Company details & Technology Type. Let me know if you're interested. I will be glad to assist you with counts and samples. Keep me posted if you are currently looking for any other technology user database. Look forward to continued success with you ! Regards, Shally Marshall Online Marketing Manager Sales Info.Inc, 800-710-7023 If you do not wish to receive future emails from us, please reply as 'leave out'

1 0

[Tipp2014] Deadlines
by Christoph Philipp 04 Nov '13

04 Nov '13

Dear Sir/Madam I got the information for this conference at the NSS/IEEE Conference in Seoul. I would love to get all available informations and deadlines (Papers, Registration, Exhibiton)? Thank you for the help. Yours sincerely, Christoph Philipp Arktis Radiation Detectors Ltd Raeffelstrasse 11, 8045 Zürich, Switzerland office: +41 (0)44 559 11 05 mobile: +41 (0)79 668 06 51 fax: +41 (0)44 559 11 19

1 0

[Tipp2014] Inquiry from AIP Publishing (American Institute of Physics)
by AIPCP AcquisitionsOffice 30 Oct '13

30 Oct '13

Dear Professor van Bakel Please excuse this direct personal e-mail but I'm writing from AIP Publishing (American Institute of Physics) to register our interest to offer a proposal for the proceedings of Technology and Instrumentation in Particle Physics '14. I warmly invite you to visit AIP Publishing's Scitation platform to read about the wide range of proceedings solutions we can offer: http://scitation.aip.org/content/aip/proceeding/aipcp/info/organizers together with some of the feedback we have received from editors/organizers who have published with us: http://scitation.aip.org/content/aip/proceeding/aipcp/info/testimonials If you have already made publication arrangements, or chosen not to publish a proceedings, please accept my apologies for having contacted you. If you are interested to receive a proceedings proposal, it would be a pleasure to discuss your proceedings requirements in more detail. With all best wishes Graham Douglas Consulting Editor, AIP Proceedings

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

tipp2014