The following email has been sent to TRONCON, Clara:
===
Dear Clara Troncon,
The submission of your abstract has been successfully processed.
Abstract submitted: https://indico.cern.ch/event/192695/call-for- abstracts/my-abstracts.
Status of your abstract: https://indico.cern.ch/event/192695/call- for-abstracts/280/.
See below a detailed summary of your submitted abstract:
Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics
Submitted by: TRONCON, Clara
Submitted on: 26 February 2014 13:06
Title: Overview of the Insertable B-Layer (IBL) Project of the ATLAS experiment at the Large Hadron Collider
Abstract content The ATLAS experiment will upgrade its Pixel Detector with the installation of a new pixel layer in 2014. The new sub-detector, named Insertable B-layer (IBL), will be installed between the existing Pixel Detector and a new smaller radius beam-pipe at a radius of 3.3 cm. To cope with the high radiation and pixel occupancy due to the proximity to the interaction point, a new read-out chip and two different silicon sensor technologies (planar and 3D) have been developed. Furthermore, the physics performance will be improved through the reduction of pixel size while targeting for a low material budget should be imposed, pushing for a new mechanical support using lightweight staves and a CO2 based cooling system. An overview of the IBL project as well as the present experience in its construction will be presented, focusing on the staves production, qualification of the assembly procedure, integration of the staves around the beam pipe and commissioning of the detector.
Summary The ATLAS experiment will upgrade its Pixel Detector with the installation of a new pixel layer in 2014. The new sub-detector, named Insertable B-layer (IBL), will be installed between the existing Pixel Detector and a new smaller radius beam-pipe at a radius of 3.3 cm.
An overview of the IBL project as well as the present experience in its construction will be presented, focusing on the staves production, qualification of the assembly procedure, integration of the staves around the beam pipe and commissioning of the detector.
Primary Authors: TRONCON, Clara (Milano Universita e INFN (IT)) clara.troncon@cern.ch
Co-authors: LAPOIRE, Cecile (Universitaet Bonn (DE)/CERN) cecile.lapoire@cern.ch
Abstract presenters: LAPOIRE, Cecile
Track classification: Experiments: 2a) Experiments & Upgrades
Presentation type: Oral
Comments: Abstract submitted on behalf of the ATLAS Inner Detector Speakers Committee.