The following email has been sent to YAN, Jacqueline:
===
Dear Jacqueline Yan,
The submission of your abstract has been successfully processed.
Abstract submitted: https://indico.cern.ch/event/192695/call-for- abstracts/my-abstracts.
Status of your abstract: https://indico.cern.ch/event/192695/call- for-abstracts/261/.
See below a detailed summary of your submitted abstract:
Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics
Submitted by: YAN, Jacqueline
Submitted on: 25 February 2014 06:11
Title: Measurement of nm Electron Beam Sizes using Laser Interference by Shintake Monitor
Abstract content The Shintake Monitor is an essential beam tuning device installed at the interaction point of ATF2 to measure its nm order vertical e- beam sizes (σy*). It is crucial for verifying ATF2’s Goal 1 of focusing σy* down to 37 nm in order to verify a final focus system of linear colliders featuring the Local Chromaticity Correction scheme. The e- beam collides with a target of laser interference fringes, and σy* is derived from the modulation depth of the resulting Compton signal photons measured by a downstream gamma detector. Shintake Monitor is the only existing device capable of measuring σy* as small as 25 nm, and can accommodates a wide range of σy* from 20 nm to a few μm with better than 10% accuracy by switching between several laser crossing angle modes. Major hardware upgrades contributed to suppressing errors and the demonstration of measurement stability of 5 - 10%. In 2013, continuous measurement of the smallest ever σy* of below 65 nm has been achieved. Analysis of systematic errors indicates the possibility that smaller beam sizes have been achieved. This paper describes the monitor’s design concepts and performance, and an extensive study of errors with the aim of high precision in measuring the even smaller σy* anticipated to be achieved at ATF2 in near future.
Summary
Primary Authors: YAN, Jacqueline (T) jackie@icepp.s.u-tokyo.ac.jp
Co-authors:
Abstract presenters: YAN, Jacqueline
Track classification: Sensors: 1a) Calorimetry Experiments: 2a) Experiments & Upgrades
Presentation type: Oral
Comments: The Shinake Monitor is the only existing device capable of measuring electron beam sizes below 100 nm, and is now in use at ATF (KEK), in Japan, which will also be the site of the International Linear Collider (ILC). It is essential for demonstrating a Final Focus System for realizing ILC.