tipp2014

tipp2014@nikhef.nl

1261 discussions

[Tipp2014] [Indico] New abstract submission: SCOTTI, Valentina
by noreply-indico-team＠cern.ch 15 Jan '14

15 Jan '14

The following email has been sent to SCOTTI, Valentina: === Dear Valentina Scotti, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=13&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: SCOTTI, Valentina Submitted on: 15 January 2014 12:31 Title: The EUSO-Balloon Instrument Abstract content EUSO-Balloon is a pathfinder mission for JEM-EUSO (Extreme Universe Space Observatory on-board the Japanese Experiment Module), the near-UV telescope proposed to be installed on board the International Space Station (ISS) before the end of this decade. The main objective of this pathfinder mission is to perform a full scale end-to-end test of all the key technologies and instrumentation of JEM-EUSO detectors and to prove the entire detection chain. The JEM-EUSO instrument consists of an UV telescope designed to focus the signal of the UV tracks generated by Extreme Energy Cosmic Rays propagating in Earth’s atmosphere, onto a finely pixelized UV camera. The EUSO-Balloon instrument, smaller respect to the one designed for the ISS, is currently developed as a payload of a stratospheric balloon operated by the French Centre National d'Études Spatiales (CNES) and will be launched during the CNES flight campaign in August 2014. This telescope will point towards the nadir from a float altitude of about 40 km. With its Fresnel Optics and Photo-Detector Module, EUSO-Balloon will monitor a 12x12° wide field of view in a wavelength range between 290 and 430 nm, at a rate of 400’000 frames/sec. In this paper, we will review the main stages of the signal processing of the EUSO-Balloon instrument: the photodetection, the analog electronics, the trigger stages, which select events while rejecting random background, the electronic acquisition system which performs the data management and the monitoring, allowing the instrument control during operation. Summary Primary Authors: SCOTTI, Valentina () <scottiv(a)na.infn.it> Dr. OSTERIA, Giuseppe (INFN NA) <osteria(a)na.infn.it> Co-authors: Abstract presenters: SCOTTI, Valentina Track classification: Experiments: 2b) Astrophysics and Space Instrumentation Data-processing: 3b) Trigger and Data Acquisition Systems Presentation type: --not specified-- Comments: for the JEM-EUSO Collaboration

1 0

[Tipp2014] [Indico] New abstract submission: CRIDER, Ben
by noreply-indico-team＠cern.ch 13 Jan '14

13 Jan '14

The following email has been sent to CRIDER, Ben: === Dear Ben Crider, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=12&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: CRIDER, Ben Submitted on: 13 January 2014 05:59 Title: Kmax-based Event Mode Data Acquisition System for the University of Kentucky Accelerator Laboratory Abstract content The University of Kentucky Acceleratory Laboratory (UKAL), a facility that possesses unique experimental capabilities for the scattering and detection of monoenergetic fast neutrons, has recently invested in updating its data acquisition capabilities. Starting with a new system for high-precision singles measurements, where subsequent analysis leads to the extraction of lifetimes in the femtosecond region via the Doppler-shift attenuation method, we have developed an event-mode coincidence data acquisition system with capabilities that allow for a new range of experiments to be performed. The Kmax-based Event Mode Data Acquisition System at UKAL utilizes existing CAMAC modules and crates, as well as the Wiener CC-USB CAMAC controller. Developed with Sparrow Corporation's Kmax 10, utilizing Java 7 and widget-based toolsheets, the system allows for high throughput with low dead times. Currently, the system is capable of supporting 40 ADCs, 32-channels of TDC, 12-channels of scaler values, and 1 Mword of in-crate memory buffering. In this presentation, the commissioning, operation, and performance of the system will be described, and the particular design choices used for the graphical user interface and the logical flow of data acquisition and translation will be discussed. This material is based on work supported by U.S. National Science Foundation under Grant No. PHY-1305801 and the U.S. Department of Energy Nuclear Energy University Programs. Summary This talk describes a recent data acquisition system update for the University of Kentucky Accelerator Laboratory (UKAL). This update allows for a new range of experiments to be performed using monoenergetic fast neutrons at UKAL. Primary Authors: Mr. CRIDER, Ben (University of Kentucky) <ben.crider(a)uky.edu> Co-authors: Prof. PIERCEY, Buz (Eastern Kentucky University) <rodney.piercey(a)eku.edu> Abstract presenters: Mr. CRIDER, Ben Prof. PIERCEY, Buz Track classification: Data-processing: 3b) Trigger and Data Acquisition Systems Presentation type: --not specified-- Comments:

1 0

[Tipp2014] industry exhibition / iseg
by Maik Donix 10 Jan '14

10 Jan '14

Dear Madam or Sir, we are very interested to exhibit our high voltage power supplies during that conference. Pls. let me know if that possibility already included into sponsorship package? Your comments in that matter would be highly appreciated. Have a great weekend! Maik Donix -- sales / Vertrieb mobil:++49 172 6569 267 iseg Spezialelektronik GmbH fon: ++49 351 269 9625 Bautzner Landstr. 23 mail: maik.donix(a)iseg-hv.de D-01454 Radeberg OT Rossendorf web: www.iseg-hv.de Geschäftsführer/Managing Director: Dr. Frank Gleisberg, Dr. Joachim Pöthig Registergericht/Lower District Court: Amtsgericht Dresden HRB 16250 Umsatzsteuer-Identnummer / VAT Id: DE 812 50 89 42 Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. This e-mail may contains confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.

1 0

[Tipp2014] [Indico] New abstract submission: WIGGERS, Leo
by noreply-indico-team＠cern.ch 08 Jan '14

08 Jan '14

The following email has been sent to WIGGERS, Leo: === Dear Leo Wiggers, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=11&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: WIGGERS, Leo Submitted on: 08 January 2014 15:39 Title: dummy2 Abstract content dummy Summary Primary Authors: WIGGERS, Leo (NIKHEF (NL)) <wiggers(a)nikhef.nl> Co-authors: Abstract presenters: WIGGERS, Leo Track classification: Sensors: 1b) Semiconductor Detectors Sensors: 1c) Gaseous Detectors Sensors: 1d) Photon Detectors Sensors: 1e) Novel technologies Experiments: 2a) Experiments & Upgrades Experiments: 2b) Astrophysics and Space Instrumentation Experiments: 2c) Detectors for neutrino physics Experiments: 2d) Dark Matter Detectors Data-processing: 3a) Front-end Electronics Data-processing: 3c) Embedded software Emerging technologies: 4a) Cooling and cryogenics Emerging technologies: 4b) MEMS Emerging technologies: 4c) 3D integration Emerging technologies: 4d) Photonics Emerging technologies: 4e) Precision engineering Technology transfer: 5a) Industry Liaisons Technology transfer: 5b) Health and healthcare Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: WIGGERS, Leo
by noreply-indico-team＠cern.ch 08 Jan '14

08 Jan '14

1 0

[Tipp2014] [Indico] New abstract submission: ALBRECHT, Johannes
by noreply-indico-team＠cern.ch 06 Jan '14

06 Jan '14

The following email has been sent to ALBRECHT, Johannes: === Dear Johannes Albrecht, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=9&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: ALBRECHT, Johannes Submitted on: 06 January 2014 08:12 Title: The LHCb trigger system: performance and outlook Abstract content The LHCb experiment is a spectrometer dedicated to the study of heavy flavor at the LHC. The rate of proton-proton collisions at the LHC is 15 MHz, of which only 5 kHz can be written to storage for offline analysis. For this reason the trigger system plays a key role in selecting signal events and rejecting background. In contrast to previous experiments at hadron colliders, the bulk of the LHCb trigger is implemented in software and deployed on a farm of 20k parallel processing nodes. This system, called the High Level Trigger (HLT) is responsible for reducing the rate from the maximum at which the detector can be read out, 1.1 MHz, to the 5 kHz which can be processed offline. The inherent flexibility of this software trigger allowed LHCb to run at twice its design luminosity in 2012. Simultaneously, the HLT performed far beyond the nominal design in terms of signal efficiencies, in particular for charm physics. It also showcased a number of pioneering concepts, for example: the deployment of an inclusive multivariate B-hadron tagger as the main physics trigger of the experiment, buffering of events to local disks, and simulation-free event-by-event trigger efficiency corrections. This talk will cover the design and performance of the LHCb trigger system, and discuss planned improvements beyond LS1 as well as plans for the LHCb upgrade trigger. Summary Primary Authors: ALBRECHT, Johannes (Technische Universitaet Dortmund (DE)) <johannes.albrecht(a)cern.ch> RAVEN, Gerhard (NIKHEF (NL)) <gerhard.raven(a)nikhef.nl> GLIGOROV, Vladimir (CERN) <vladimir.gligorov(a)cern.ch> Co-authors: Abstract presenters: ALBRECHT, Johannes RAVEN, Gerhard GLIGOROV, Vladimir Track classification: Data-processing: 3b) Trigger and Data Acquisition Systems Presentation type: --not specified-- Comments:

1 0

[Tipp2014] Financed Printing for TIPP2014
by Patrick Gabriel 06 Jan '14

06 Jan '14

Dear Mr. van Bakel : I am contacting you concerning your upcoming Event: TIPP2014. We offer a completely FREE SERVICE whereby we will handle all the page-layout, Printing and Delivery of your Event Publications be they Congress Catalogs, Event Handbooks or Abstract Books. We fully finance and handle all page layout, publishing, printing, and even delivery of your event publication saving you a great deal of time and expense. We have many years experience in producing high quality publications for our client Organizations based on their diverse needs. Furthermore, we do not compete with any existing Sponsorship arrangement and the publication remains fully your property. Samples of some prior examples can be found at: http://www.eventsonsocial.com/oursamples Our company, OSC-EventsOnSocial, is the Specialist when it comes to helping Organizations promote and market their events using Social Media and Online Marketing. Whether your goal is to educate and inform your market about your event, drive word of mouth or drive repeat or more attendees, we are your answer. We are Specialists are Crafting and Executing Event Social Marketing Plans : Using Social Media to Promote Your EventsTo Share AnnouncementsTo Increase Conversations About Your EventTo Drive Engagement Around Your EventFor Organization and Event BrandingPlease also feel free to consult our website to find a more detailed presentation of our services. More information can be found at: http://www.eventsonsocial.com Please feel free to contact me should you have any questions.Thanking you in advance.Best Regards,Patrick Gabriel OSC-Events on Social Phone: +33.1.83.62.48.58 Email: pgabriel(a)osc-associates.com OSC-Events on Social (Europe) 12 Place Carnot, 93110 Rosny Sous Bois, France Tel: (+33) 01 83 62 48 58 Fax: (+33) 01 77 72 27 59 OSC-Events on Social (North America) 269 S. Beverly Drive, Suite 630, Beverly Hills, CA 90212, USA Tel: (+1) 310-878-9534 Fax: (+1) 310-861-1986 Email: contact(a)eventsonsocial.com

1 0

[Tipp2014] Technology and Instrumentation in Particle Physics '14
by Jeff Barden 03 Jan '14

03 Jan '14

Hi Please forward information and prices to exhibit at the Technology and Instrumentation in Particle Physics '14 Jeff Barden Technical Sales MDC Vacuum Ltd 3 Horsted Square Bellbrook Industrial Estate Uckfield, East Sussex TN22 1QG ' +44 (0)1825 280454 È +44 (0)7920 114801

1 0

[Tipp2014] Financed Printing for TIPP2014
by Patrick Gabriel 23 Dec '13

23 Dec '13

Dear Mr. van Bakel : I recently sent you an email offering free printing for your upcoming Event: TIPP2014. Can you please advise if our offer is of interest to you. Please feel free to contact me should you have any questions.Thanking you in advance.Best Regards,Patrick Gabriel OSC-Events on Social Phone: +33.1.83.62.48.58 Email: pgabriel(a)osc-associates.com OSC-Events on Social (Europe) 12 Place Carnot, 93110 Rosny Sous Bois, France Tel: (+33) 01 83 62 48 58 Fax: (+33) 01 77 72 27 59 OSC-Events on Social (North America) 269 S. Beverly Drive, Suite 630, Beverly Hills, CA 90212, USA Tel: (+1) 310-878-9534 Fax: (+1) 310-861-1986 Email: contact(a)eventsonsocial.com Previously Sent Email:---------------------------------------------------------------------------------------------------------------------------------------------------------- Dear Mr. van Bakel : I am contacting you concerning your upcoming Event: TIPP2014. We offer a completely FREE SERVICE whereby we will handle all the page-layout, Printing and Delivery of your Event Publications be they Congress Catalogs, Event Handbooks or Abstract Books. We fully finance and handle all page layout, publishing, printing, and even delivery of your event publication saving you a great deal of time and expense. We have many years experience in producing high quality publications for our client Organizations based on their diverse needs.Samples of some prior examples can be found at: http://www.eventsonsocial.com/oursamples Our company, OSC-EventsOnSocial, is the Specialist when it comes to helping Organizations promote and market their events using Social Media and Online Marketing. Whether your goal is to educate and inform your market about your event, drive word of mouth or drive repeat or more attendees, we are your answer. We are Specialists are Crafting and Executing Event Social Marketing Plans : Using Social Media to Promote Your EventsTo Share AnnouncementsTo Increase Conversations About Your EventTo Drive Engagement Around Your EventFor Organization and Event BrandingPlease also feel free to consult our website to find a more detailed presentation of our services. More information can be found at: http://www.eventsonsocial.com Please feel free to contact me should you have any questions.Thanking you in advance.Best Regards,Patrick GabrielOSC-Events on Social Phone: +33.1.83.62.48.58 Email: pgabriel(a)osc-associates.com OSC-Events on Social (Europe) 12 Place Carnot, 93110 Rosny Sous Bois, France Tel: (+33) 01 83 62 48 58 Fax: (+33) 01 77 72 27 59 OSC-Events on Social (North America) 269 S. Beverly Drive, Suite 630, Beverly Hills, CA 90212, USA Tel: (+1) 310-878-9534 Fax: (+1) 310-861-1986 Email: contact(a)eventsonsocial.com

1 0

[Tipp2014] Sponsoring
by Rosner, Annika 19 Dec '13

19 Dec '13

Dear Arjen van Rijn, we are thinking of a sponsoring at the TIPP 2014. Could you please give me some more information than what I found on the webpage? Kind regards, Annika Rosner ------------------------------------------------------------------------ - Dipl-Inf. Annika Rosner Deutsches Elektronen-Synchrotron DESY A Research Centre of the Helmholtz Association Notkestr. 85 22607 Hamburg Germany phone: +49-40-8998-1957 e-mail: annika.rosner(a)desy.de web: http://www.desy.de/index_eng.html

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

tipp2014