tipp2014

tipp2014@nikhef.nl

1261 discussions

Start a nNew thread

[Tipp2014] Your new contact form
by service＠foxyform.com 20 Nov '13

20 Nov '13

1 0

[Tipp2014] [Indico] New abstract submission: Dr. HAST, Carsten
by noreply-indico-team＠cern.ch 19 Nov '13

19 Nov '13

The following email has been sent to Dr. HAST, Carsten: === Dear Carsten Hast, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=4&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: Dr. HAST, Carsten Submitted on: 19 November 2013 02:23 Title: Electron Test Beams at SLAC Abstract content We present the current status and plans of the various electron test beams available at SLAC National Accelerator Laboratory. They span an energy range of a few MeV in our ASTA, mainly used for gun development and RF structure testing, NLCTA, a 120 to 200 MeV linac for free electron laser seeding, dielectric laser acceleration and medical studies, to ESTB, the End Station (A) Test Beam, which uses 5 Hz of the LCLS 2 to 16GeV beam for ILC MDI and detector R&D studies with primary beam and singel electrons, to FACET, which has a very compressed and small spot size 20GeV beam for plasma wakefield acceleration, material science and other advanced acceleration concepts studies. For all these facilities an overview of past, present and future experiments and plans will be given. Summary Primary Authors: Dr. HAST, Carsten (SLAC) <hast(a)slac.stanford.edu> Co-authors: Abstract presenters: Dr. HAST, Carsten Track classification: Sensors: 1e) Novel technologies Experiments: 2a) Experiments & Upgrades Presentation type: --not specified-- Comments: This is a suggested facilities talk, I am not quite sure what the right category to choose is for that.

1 0

[Tipp2014] submission of abstract
by Johannes Albrecht 13 Nov '13

13 Nov '13

Dear TIPP organisers, i would like to upload an abstract for a talk on the LHCb HLT for TIPP14, should i do this via mail to you or is there a web-page which i missed? many thanks in advance Johannes Albrecht for the LHCb Trigger project

1 0

[Tipp2014] [Indico] New abstract submission: SOHA, Aria
by noreply-indico-team＠cern.ch 12 Nov '13

12 Nov '13

The following email has been sent to SOHA, Aria: === Dear Aria Soha, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=3&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: SOHA, Aria Submitted on: 12 November 2013 19:26 Title: Dark Matter Detector Prototype testing area Underground Abstract content Located 350 feet beneath the surface the MINOS Underground Areas, at Fermilab provide a useful shallow testing site for Dark Matter Detector R&D. It is accessible 24hrs/day, 365 days/year, under normal circumstances, with minimal training. The area is fully supported by Fermilab staff and resources, including network capabilities and other utilities. It has been used by the DAMIC and COUPP experiments to trouble shoot problems before moving to the deeper and less accessible SNOLAB. Other notable test experiments include DM-Ice, Sci-Bath, Peanut, and ArgoNeuT. Summary Primary Authors: Dr. LEE, Bill (Fermilab) <billl(a)fnal.gov> SOHA, Aria (Fermilab) <aria(a)fnal.gov> Co-authors: Abstract presenters: Dr. LEE, Bill Track classification: Sensors: 1e) Novel technologies Experiments: 2a) Experiments & Upgrades Experiments: 2c) Detectors for neutrino physics Experiments: 2d) Dark Matter Detectors Presentation type: --not specified-- Comments:

1 0

[Tipp2014] [Indico] New abstract submission: SOHA, Aria
by noreply-indico-team＠cern.ch 11 Nov '13

11 Nov '13

The following email has been sent to SOHA, Aria: === Dear Aria Soha, The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=2&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: SOHA, Aria Submitted on: 11 November 2013 22:55 Title: MWPC Tracking System Upgrade Abstract content The Multiwire Proportional Chamber Tracking System at the Fermilab Test Beam Facility has been upgraded. Improvements include a renovation of the chambers themselves to vastly improve noise on the signals. An extensive study was done to find the most efficient gas for operation, and a completely new electronics read-out system has been created to improve reliability, and system compatibility. Users can now have an ASCII file for each run to merge into their DAQ system, and an event display. Summary The Multiwire Proportional Chamber Tracking System at the Fermilab Test Beam Facility has been upgraded. Improvements include a renovation of the chambers themselves to vastly improve noise on the signals. An extensive study was done to find the most efficient gas for operation, and a completely new electronics read-out system has been created to improve reliability, and system compatibility. Users can now have an ASCII file for each run to merge into their DAQ system, and an event display. Primary Authors: SKUP, Ewa (Fermilab) <eskup(a)fnal.gov> Co-authors: SOHA, Aria (Fermilab) <aria(a)fnal.gov> Abstract presenters: SKUP, Ewa Track classification: Sensors: 1c) Gaseous Detectors Experiments: 2a) Experiments & Upgrades Data-processing: 3a) Front-end Electronics Data-processing: 3b) Trigger and Data Acquisition Systems Presentation type: --not specified-- Comments: This could also be part of a Test Beam track

1 0

[Tipp2014] [Indico] New abstract submission:
by noreply-indico-team＠cern.ch 11 Nov '13

11 Nov '13

The following email has been sent to : === Dear , The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=1&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: Submitted on: 11 November 2013 22:22 Title: New High Rate Tracking area Abstract content A new area for beam tests of high rate tracking devices is being commissioned at the Fermilab Test Beam Facility. The new area is in the MTest beam line upstream of the pinhole collimator in the MT3 Alcove. This area is suitable for tests of detectors with modest transverse dimensions. High rate tests will use 120 GeV protons. The maximum rate available is approximately 2.5 GHz/cm2(1E10 particles/spill). A Patch panel for signal and high voltage cables links the enclosure alcove area with the MS3 service building, where experimenters can monitor their apparatus. Network fiber is installed between the two areas, with capabilities for general network access and private network capabilities. A remotely controllable motion table is available so users can perform beam scans, and move detectors completely into and out of the beam, without making accesses to the beam enclosure. Summary A new area for beam tests of high rate tracking devices is being commissioned at the Fermilab Test Beam Facility. The new area is in the MTest beam line upstream of the pinhole collimator in the MT3 Alcove. This area is suitable for tests of detectors with modest transverse dimensions. High rate tests will use 120 GeV protons. The maximum rate available is approximately 2.5 GHz/cm2(1E10 particles/spill). A Patch panel for signal and high voltage cables links the enclosure alcove area with the MS3 service building, where experimenters can monitor their apparatus. Network fiber is installed between the two areas, with capabilities for general network access and private network capabilities. A remotely controllable motion table is available so users can perform beam scans, and move detectors completely into and out of the beam, without making accesses to the beam enclosure. Primary Authors: SOHA, Aria (Fermilab) <aria(a)fnal.gov> Co-authors: Abstract presenters: SOHA, Aria Track classification: Sensors: 1b) Semiconductor Detectors Sensors: 1c) Gaseous Detectors Sensors: 1e) Novel technologies Experiments: 2a) Experiments & Upgrades Presentation type: --not specified-- Comments: Would also be appropriate for a Test Beam category.

1 0

[Tipp2014] [Indico] New abstract submission:
by noreply-indico-team＠cern.ch 11 Nov '13

11 Nov '13

The following email has been sent to : === Dear , The submission of your abstract has been successfully processed. Abstract submitted: <https://indico.cern.ch/userAbstracts.py?confId=192695>. Status of your abstract: <https://indico.cern.ch/abstractDisplay.py?abstractId=0&confId=192695>. See below a detailed summary of your submitted abstract: Conference: Tipp 2014 - Third International Conference on Technology and Instrumentation in Particle Physics Submitted by: Submitted on: 11 November 2013 22:14 Title: Improvements to the Fermilab Test Beam Facility Abstract content The Fermilab Test Beam Program provides flexible, equal, and open access to test beams for all detector tests, with relatively low bureaucratic overhead and a guarantee of safety, coordination, and oversight. The facility provides a multitude of particle and energy types, as well as an array of instrumentation with an extensive infrastructure. Recently Fermilab went through a 14 month downtime for accelerator and facility upgrades. During this time, many extensive upgrades were made to the facility including temperature regulation, remote control systems, and instrumentation upgrades. Summary The Fermilab Test Beam Program provides flexible, equal, and open access to test beams for all detector tests, with relatively low bureaucratic overhead and a guarantee of safety, coordination, and oversight. The facility provides a multitude of particle and energy types, as well as an array of instrumentation with an extensive infrastructure. Recently Fermilab went through a 14 month downtime for accelerator and facility upgrades. During this time, many extensive upgrades were made to the facility including temperature regulation, remote control systems, and instrumentation upgrades. Patch Panel, Cable, & Network Upgrade Insulation of MT6.2 Enclosure Addition of 2C hut Camera Upgrade Alignment Laser Upgrade Communication System Upgrade Tracking System Upgrade Control Rooms re-configuration Electronics Room Re-configuration Motion Table Control System Upgrade Primary Authors: SOHA, Aria (Fermilab) <aria(a)fnal.gov> Co-authors: Abstract presenters: SOHA, Aria Track classification: Sensors: 1a) Calorimetry Sensors: 1b) Semiconductor Detectors Sensors: 1c) Gaseous Detectors Sensors: 1d) Photon Detectors Sensors: 1e) Novel technologies Experiments: 2a) Experiments & Upgrades Presentation type: --not specified-- Comments: Would belong in a Test Beams track

1 0

[Tipp2014] SURF***SPAM***6.2 Technology Users List- 2013
by Sally Marshall 08 Nov '13

08 Nov '13

Hi, Would you be interested in acquiring any of the following Technology Users List contact information at this time for your lead generation, sales growth, email campaign or other marketing initiatives? Technology Users Like: Technology Partners include independent software vendors (ISVs), SaaS, PaaS, developer tools, management and security vendors.System Integrators (SIs), strategic consultancies, resellers, agencies and value-added retailers/resellers (VARs), VMware, Microsoft HyperV, WebEx, Amazon Web Services, Rackspace, Salesforce, SAP, Oracle Database, Oracle e-Business Suit, PeopleSoft, JD Edwards, Siebel, Hyperion, Microsoft Dynamic AX/NAV/GP/CRM, Exchange Server, Share Point, .Net, Biz Talk, IBM Lotus Notes, File Net, Mainframe, Tivoli, Web Sphere, Cognos, Sage, MAS 90/200, AMDOCS/Clarify, QuickBooks, Salesforce.com, Peachtree, Net Suite, Remedy, Baan, Mapics Application and many more. Information fields: Contact Name, Job Title, Email Address, Phone Number, Fax Number, Company details & Technology Type. Let me know if you're interested. I will be glad to assist you with counts and samples. Keep me posted if you are currently looking for any other technology user database. Look forward to continued success with you ! Regards, Shally Marshall Online Marketing Manager Sales Info.Inc, 800-710-7023 If you do not wish to receive future emails from us, please reply as 'leave out'

1 0

[Tipp2014] Deadlines
by Christoph Philipp 04 Nov '13

04 Nov '13

Dear Sir/Madam I got the information for this conference at the NSS/IEEE Conference in Seoul. I would love to get all available informations and deadlines (Papers, Registration, Exhibiton)? Thank you for the help. Yours sincerely, Christoph Philipp Arktis Radiation Detectors Ltd Raeffelstrasse 11, 8045 Zürich, Switzerland office: +41 (0)44 559 11 05 mobile: +41 (0)79 668 06 51 fax: +41 (0)44 559 11 19

1 0

[Tipp2014] Inquiry from AIP Publishing (American Institute of Physics)
by AIPCP AcquisitionsOffice 30 Oct '13

30 Oct '13

Dear Professor van Bakel Please excuse this direct personal e-mail but I'm writing from AIP Publishing (American Institute of Physics) to register our interest to offer a proposal for the proceedings of Technology and Instrumentation in Particle Physics '14. I warmly invite you to visit AIP Publishing's Scitation platform to read about the wide range of proceedings solutions we can offer: http://scitation.aip.org/content/aip/proceeding/aipcp/info/organizers together with some of the feedback we have received from editors/organizers who have published with us: http://scitation.aip.org/content/aip/proceeding/aipcp/info/testimonials If you have already made publication arrangements, or chosen not to publish a proceedings, please accept my apologies for having contacted you. If you are interested to receive a proceedings proposal, it would be a pleasure to discuss your proceedings requirements in more detail. With all best wishes Graham Douglas Consulting Editor, AIP Proceedings

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

tipp2014